An administrator is troubleshooting why RADIUS authentication for device access is failing on a Cisco WLC. The RADIUS server is reachable from the WLC, and the shared secret is correct. Which command should be used to verify the RADIUS server configuration and test connectivity?

test aaa group radius ADMIN-RADIUS user test pass test123

show running-config | include radius

A network administrator needs to configure a Cisco wireless controller to authenticate administrative users against a central RADIUS server. Which configuration step is required on the controller?

Create a RADIUS server entry and add it to a AAA server group used for login authentication.

Enable TACACS+ and specify the shared secret for the RADIUS server.

Configure the RADIUS server as the default SNMP community string.

Set the RADIUS server IP address in the NTP configuration.

What is the purpose of configuring a login banner on a Cisco wireless controller?

To display a legal warning or notice before a user logs in.

To restrict which users can access the device.

To encrypt the login credentials during transmission.

A security policy requires that only the network management subnet (192.168.10.0/24) can access the Cisco WLC's management interface. The engineer needs to enforce this restriction. What should be configured on the WLC?

Apply an ACL that permits only 192.168.10.0/24 to the management interface.

Configure a local user account for management access.

Enable SSH and disable Telnet on the management interface.

Set the management interface to a different VLAN.

CiscoCertified Network Professional Enterprise Wireless (ENWLSI)

Domain 8Objective 1

8.1 Implement Device Access Controls (including RADIUS and TACACS+) 300-430 Practice Questions (Page 8)

Part of the Device Hardening domain, which accounts for 10% of the 300-430 exam. Cisco does not publish an official question count, but from its 90-minute exam (~35–60 total, ~4–6 in this domain), expect 1–2 from this objective — we provide 50 practice questions to prepare you well beyond it. (estimate)

50questions here

10free pages

10concepts

10%of the exam

Questions 36–40

36foundation · easy
Which command on a Cisco wireless controller is used to verify that RADIUS authentication is configured for device access?
Select an answer first
37application · medium
An administrator is troubleshooting why RADIUS authentication for device access is failing on a Cisco WLC. The RADIUS server is reachable from the WLC, and the shared secret is correct. Which command should be used to verify the RADIUS server configuration and test connectivity?
Select an answer first
38foundation · easy
A network administrator needs to configure a Cisco wireless controller to authenticate administrative users against a central RADIUS server. Which configuration step is required on the controller?
Select an answer first
39foundation · easy
What is the purpose of configuring a login banner on a Cisco wireless controller?
Select an answer first
40application · medium
A security policy requires that only the network management subnet (192.168.10.0/24) can access the Cisco WLC's management interface. The engineer needs to enforce this restriction. What should be configured on the WLC?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to 300-430

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Cisco. “300-430” is a trademark of its owner, used for identification only.