6.1 Configure Client Profiling on WLC and ISE 300-430 Practice Questions (Page 7)

Questions 31–35

1. 31application · medium

   A company has ISE deployed in a centralized data center and WLCs at remote sites. They want to use ISE profiling for all wireless clients. What is the recommended way to send profiling data from the remote WLCs to ISE?

   • AEnable local profiling on each WLC and manually sync profiles to ISE.
   • BUse NetFlow export from the WLCs to ISE.
   • CConfigure each WLC to send RADIUS accounting to the ISE over the WAN.
   • DUse SNMP traps from the WLCs to ISE.
   Reveal Solution Discussion Select an answer first
2. 32expert · hard

   A company has WLCs and ISE. They want to use profiling to assign different VLANs to iPads and Windows laptops. They have enabled RADIUS accounting and AAA Override. However, all clients are being assigned the default VLAN. What is the most likely cause?

   • AThe clients are not being profiled because DHCP is disabled.
   • BThe ISE authorization policy is not returning a VLAN attribute.
   • CThe WLC is using local profiling policies instead of ISE.
   • DThe WLC is not configured with the ISE as a RADIUS server.
   Reveal Solution Discussion Select an answer first
4. 33foundation · easy

   Which component in ISE is responsible for collecting client attributes for profiling?

   • ACertificate templates
   • BNetwork access devices
   • CPolicy sets
   • DProfiling probes
   Reveal Solution Discussion Select an answer first
5. 34expert · hard

   An ISE administrator is troubleshooting why a specific model of IP phone is not being profiled correctly. The phone is on a voice VLAN and does not generate HTTP traffic. The DHCP probe is enabled, but the phone uses a custom DHCP vendor class that is not in the ISE dictionary. What is the best way to profile this phone?

   • AEnable the SNMP probe on the switch to query the phone.
   • BEnable the HTTP probe and wait for the phone to generate web traffic.
   • CUse the RADIUS probe to capture the phone’s MAC address.
   • DCreate a custom profiling policy that matches the custom DHCP vendor class.
   Reveal Solution Discussion Select an answer first
6. 35expert · hard

   A Cisco 9800 WLC is configured with local client profiling. The administrator wants to profile clients based on their MAC OUI and DHCP vendor class. They have created a policy that matches on both conditions. However, some clients are not being profiled. What is the most likely reason?

   • AThe DHCP probe is not enabled on the WLAN
   • BThe policy requires both conditions to match, but some clients do not send DHCP vendor class
   • CThe MAC OUI is not in the WLC's database
   • DThe clients are using static IP addresses
   Reveal Solution Discussion Select an answer first