A network administrator is configuring a trunk between two switches. The administrator wants to carry VLANs 10, 20, and 30, but also wants to ensure that broadcast traffic from VLAN 10 does not affect VLAN 20 and 30. Which configuration is required?

Use the same native VLAN for all three VLANs.

Disable broadcast filtering on the trunk.

Configure the trunk to carry all three VLANs with 802.1Q tagging.

Configure the trunk as an access port in VLAN 10.

How do VLANs improve network security?

By isolating traffic between different groups of devices

By blocking all broadcast traffic

By preventing MAC address spoofing

By encrypting all traffic within the VLAN

What is the purpose of assigning an access port to a VLAN?

To enable the port to route between VLANs

To allow the port to carry traffic for multiple VLANs

To connect the port to another switch for trunking

To place the connected device into a specific broadcast domain

What is the function of a trunk port on a Cisco switch?

To carry traffic for multiple VLANs between switches

To connect to an end device such as a PC

To connect to a router for inter-VLAN routing

To provide a single VLAN for a group of devices

CiscoCertified Network Associate Automation (CCNA Automation)

Domain 6Objective 1

1. Describe the Purpose and Usage of MAC Addresses and VLANs 200-901 Practice Questions (Page 4)

Part of the 6.0 Network Fundamentals domain, which accounts for 15% of the 200-901 exam. Cisco does not publish an official question count, but from its 120-minute exam (~50–80 total, ~8–12 in this domain), expect 1–1 from this objective — we provide 38 practice questions to prepare you well beyond it. (estimate)

38questions here

8free pages

7concepts

15%of the exam

Questions 16–20

16expert · hard
A network administrator is configuring a trunk between two switches. The administrator wants to carry VLANs 10, 20, and 30, but also wants to ensure that broadcast traffic from VLAN 10 does not affect VLAN 20 and 30. Which configuration is required?
Select an answer first
17foundation · easy
How do VLANs improve network security?
Select an answer first
18foundation · easy
What is the purpose of assigning an access port to a VLAN?
Select an answer first
19foundation · easy
What is the function of a trunk port on a Cisco switch?
Select an answer first
20foundation · easy
Which MAC address is used to send a frame to all devices on a local network segment?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to 200-901

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Cisco. “200-901” is a trademark of its owner, used for identification only.