2.6 Describe Cisco Wireless Architectures and AP Modes 200-301 Practice Questions (Page 5)

Questions 21–25

1. 21foundation · easy

   In local AP mode, how is client traffic handled?

   • AIt is dropped by the AP.
   • BIt is switched locally by the AP.
   • CIt is sent directly to the internet without any controller.
   • DIt is tunneled to the wireless LAN controller.
   Reveal Solution Discussion Select an answer first
2. 22expert · hard · select all that apply

   A network engineer is planning a wireless deployment for a campus. The engineer has a limited number of APs and must support the following requirements: (1) provide client access, (2) perform security monitoring, (3) capture packets for troubleshooting, and (4) detect rogues on the wired network. Select all AP modes that could be used to satisfy at least one of these requirements while also potentially serving clients.

   • ARogue detector mode
   • BFlexConnect mode
   • CLocal mode
   • DMonitor mode
   • ESniffer mode
   Check answers Discussion Select an answer first
4. 23foundation · easy

   Which function is performed by the AP in a centralized (split-MAC) architecture?

   • ARoaming decisions
   • BBeaconing and real-time frame forwarding
   • CConfiguration management
   • DClient authentication
   Reveal Solution Discussion Select an answer first
5. 24expert · medium

   A small business has a single autonomous AP. The owner wants to add a second AP and have a single management interface for both. They do not want to purchase a controller. Which option is the most practical?

   • AKeep autonomous APs and manage them individually
   • BAdd a WLC and convert the APs to lightweight mode
   • CReplace the autonomous APs with cloud-based APs
   • DUse FlexConnect mode without a WLC
   Reveal Solution Discussion Select an answer first
6. 25expert · hard

   A company has a large campus with many APs in local mode. The security team wants to detect rogue APs that are not connected to the wired network but are operating in the area. They also want to detect rogue APs that are plugged into the wired network. The team has limited spare APs. Which strategy is most effective?

   • AReplace all local mode APs with monitor mode APs
   • BUse local mode APs for over-the-air rogue detection and add a few rogue detector mode APs on the wired network
   • CUse only rogue detector mode APs
   • DUse sniffer mode APs to detect rogues
   Reveal Solution Discussion Select an answer first