A host is configured with IP address 192.168.1.5 and subnet mask 255.255.255.0, but its default gateway is 192.168.2.1. What is the most likely result?

The host can communicate with all devices on the internet.

The host can communicate only with the default gateway.

The host will automatically correct the gateway address.

The host cannot communicate with devices on other subnets.

In VLSM, which principle is applied when allocating subnets to different network segments?

Subnets are allocated from the highest IP address downward to avoid overlap.

All segments must use the same subnet mask to simplify routing.

The largest subnet is allocated first, regardless of host requirements.

Each segment receives a subnet mask tailored to its specific host count.

CiscoCertified Network Associate (CCNA)

Domain 1Objective 6

1.6 Configure and Verify IPv4 Addressing and Subnetting 200-301 Practice Questions (Page 4)

Part of the Network Fundamentals domain, which accounts for 20% of the 200-301 exam. Cisco does not publish an official question count, but from its 120-minute exam (~50–80 total, ~10–16 in this domain), expect 1–1 from this objective — we provide 20 practice questions to prepare you well beyond it. (estimate)

20questions here

4free pages

9concepts

20%of the exam

Questions 16–20

16foundation · easy
A network engineer is using VLSM to divide the 192.168.1.0/24 network into subnets. Which subnet mask should be used for a segment that needs exactly 10 usable host addresses?
Select an answer first
17foundation · easy
Which command displays a summary of IPv4 addresses assigned to all interfaces on a Cisco router?
Select an answer first
18foundation · easy
A host is configured with IP address 192.168.1.5 and subnet mask 255.255.255.0, but its default gateway is 192.168.2.1. What is the most likely result?
Select an answer first
19foundation · easy
Which configuration mode must be entered before issuing the 'ip address' command on a Cisco router interface?
Select an answer first
20foundation · easy
In VLSM, which principle is applied when allocating subnets to different network segments?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

No more pagesBack to 200-301

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Cisco. “200-301” is a trademark of its owner, used for identification only.

1.6 Configure and Verify IPv4 Addressing and Subnetting 200-301 Practice Questions (Page 4)

Questions 16–20

A network engineer is using VLSM to divide the 192.168.1.0/24 network into subnets. Which subnet mask should be used for a segment that needs exactly 10 usable host addresses?

Which command displays a summary of IPv4 addresses assigned to all interfaces on a Cisco router?

A host is configured with IP address 192.168.1.5 and subnet mask 255.255.255.0, but its default gateway is 192.168.2.1. What is the most likely result?

Which configuration mode must be entered before issuing the 'ip address' command on a Cisco router interface?

In VLSM, which principle is applied when allocating subnets to different network segments?

Keep studying — Network Fundamentals