CiscoCertified Support Technician (CCST) Networking
Domain 4Objective 2
4.2. Use a Network Diagram Provided by an Engineer to Attach the Appropriate Cables. 100-150 Practice Questions (Page 8)
Part of the Infrastructure domain, which makes up ~18% of our current practice bank. Cisco does not publish an official question count, but from its 50-minute exam (~20–35 total, ~4–6 in this domain), expect 1–1 from this objective — we provide 39 practice questions to prepare you well beyond it. (estimate)
39questions here
8free pages
6concepts
Questions 36–39
- 36
You are connecting a router to a switch in a diagram. The router has a 10GBASE-T port and the switch has a 10GBASE-T port. The diagram does not specify a cable category. You have Cat5e and Cat6a patch cables. Which cable should you use?
Select an answer first - 37
You are wiring a small network with a star topology. The diagram shows a central switch connected to three servers and two workstations. You have a 1-meter cable, a 3-meter cable, and a 5-meter cable. The servers are in a rack next to the switch, and the workstations are 4 meters away. Which cable should you use for the workstation connections?
Select an answer first - 38
You are wiring a network with a router, a switch, and a firewall. The diagram shows the firewall between the router and the switch. You have three Ethernet cables. Which connection is correct?
Select an answer first - 39
A technician is wiring a daisy-chain topology from a diagram. The diagram shows three switches, SW1, SW2, and SW3, connected in a line: SW1 to SW2, and SW2 to SW3. Each switch also has a PC connected. The technician has straight-through and crossover cables. Which cables should be used for the switch-to-switch links?
Select an answer first
Finished these 4 questions?
Review the revealed explanations, or continue through the curriculum.
No more pagesBack to 100-150
Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Cisco. “100-150” is a trademark of its owner, used for identification only.