Examers.io
ExamsOrganizationsHow it worksPricingHelp & FAQ
Cisco logo

CiscoCertified Support Technician (CCST) Networking

Domain 4Objective 2

4.2. Use a Network Diagram Provided by an Engineer to Attach the Appropriate Cables. 100-150 Practice Questions (Page 6)

Part of the Infrastructure domain, which makes up ~18% of our current practice bank. Cisco does not publish an official question count, but from its 50-minute exam (~20–35 total, ~4–6 in this domain), expect 1–1 from this objective — we provide 39 practice questions to prepare you well beyond it. (estimate)

39questions here
8free pages
6concepts

Questions 26–30

  1. 26application · easy

    A diagram shows a star topology with a central switch and five end devices. The switch is mounted in a rack, and the end devices are in different offices. You have a 1-meter patch cable, a 5-meter patch cable, and a 20-meter patch cable. Which cable should you use for the connection from the switch to the farthest office?

    Select an answer first
  2. 27application · medium

    You are connecting a router to a cable modem. The router's WAN port is labeled 'WAN' and the modem has an Ethernet port. The diagram shows a straight-through cable between the two. You have a straight-through cable and a crossover cable. Which cable should you use?

    Select an answer first
  3. 28application · medium

    You are installing a switch that has a label showing 'DC 48V' next to the power connector. You have a power supply that outputs 48V DC and a power cord that connects to a standard AC outlet. What should you do?

    Select an answer first
  4. 29application · medium

    A diagram shows two switches, SW1 and SW2, connected to each other, and SW2 connected to a router. The diagram labels the SW1-to-SW2 link as 'Trunk' and the SW2-to-router link as 'Access'. The technician has straight-through and crossover cables. Which cables should be used?

    Select an answer first
  5. 30application · medium

    A diagram shows a firewall with two interfaces: 'Inside' and 'Outside'. The 'Inside' interface is connected to a switch, and the 'Outside' interface is connected to a router. The technician has a straight-through cable and a crossover cable. Which cable should be used for the firewall-to-switch connection?

    Select an answer first
Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Cisco. “100-150” is a trademark of its owner, used for identification only.