What is a common troubleshooting step for a Colo-Connect issue in Prisma Access?

Restarting the ZTNA Connector in the colocation facility.

Verifying that the connection to the cloud exchange provider is active.

Changing the pre-shared key on the service connection.

Reinstalling the Prisma Access client on the user's device.

Which of the following is required to configure Colo-Connect in Prisma Access?

A ZTNA Connector deployed in the colocation facility.

A VPN gateway in the colocation facility that supports IPsec.

A supported cloud exchange provider that has a presence in the colocation facility.

A public IP address for the colocation facility's firewall.

What is the purpose of configuring a ZTNA application in Prisma Access?

To set up the authentication method for users.

To configure the ZTNA Connector's network settings.

To define which private applications can be accessed through the ZTNA Connector.

To monitor the performance of the ZTNA Connector.

What is a key step in configuring Colo-Connect in Prisma Access?

Establishing a connection through a supported cloud exchange provider, such as Equinix Fabric.

Configuring a standard IPsec tunnel to the colocation facility's VPN gateway.

Deploying a ZTNA Connector in the colocation facility.

Setting up a remote network connection to the colocation facility.

A company has multiple ZTNA Connectors deployed. One connector is frequently going offline. What is the best way to troubleshoot this?

Increase the number of connectors to provide redundancy.

Check the connector's system logs for errors and verify its outbound connectivity to Prisma Access.

Replace the connector with a new one.

Change the security policy to allow more traffic.

Palo Alto NetworksCertified Security Service Edge Engineer

Domain 1Objective 6

1.6 Configure and Manage Private Application Access SECURITY-SERVICE-EDGE-ENGINEER Practice Questions (Page 6)

Part of the Prisma Access Planning and Deployment domain, which accounts for 22% of the SECURITY-SERVICE-EDGE-ENGINEER exam.

36questions here

8free pages

10concepts

22%of the exam

10 Concepts in This Objective

Service connections overview
Service connection configuration
Service connection routing and high availability
Colo-Connect overview
Colo-Connect configuration
Colo-Connect management and monitoring
ZTNA Connector overview
ZTNA Connector deployment
ZTNA Connector configuration and policy
ZTNA Connector monitoring and troubleshooting

Questions 26–30

26foundation · easy
What is a common troubleshooting step for a Colo-Connect issue in Prisma Access?
Select an answer first
27foundation · easy
Which of the following is required to configure Colo-Connect in Prisma Access?
Select an answer first
28foundation · easy
What is the purpose of configuring a ZTNA application in Prisma Access?
Select an answer first
29foundation · easy
What is a key step in configuring Colo-Connect in Prisma Access?
Select an answer first
30expert · hard
A company has multiple ZTNA Connectors deployed. One connector is frequently going offline. What is the best way to troubleshoot this?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to SECURITY-SERVICE-EDGE-ENGINEER

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Palo Alto Networks. “SECURITY-SERVICE-EDGE-ENGINEER” is a trademark of its owner, used for identification only.