3.3 Explain Alert and Notification Configuration SD-WAN-ENGINEER Practice Questions (Page 4)

Questions 16–20

1. 16foundation · easy

   After configuring an email notification for alerts, what is the best way to confirm that the configuration is working?

   • AReview the alert thresholds
   • BGenerate a test alert and verify that the email is received
   • CDisable and re-enable the alert
   • DCheck the syslog server for messages
   Reveal Solution Discussion Select an answer first
2. 17expert · hard

   An MSP monitors multiple customers. Customer A wants alerts sent to their internal NOC, while Customer B wants alerts sent to the MSP's NOC. The MSP uses a single SD-WAN management platform. What is the most efficient way to configure notifications for both customers?

   • ACreate a single alert rule with both recipients and no filter
   • BUse SNMP traps for Customer A and email for Customer B
   • CConfigure the same recipient for all alerts and rely on the customers to filter
   • DCreate separate alert rules for each customer, each with the appropriate recipient and a filter for the customer's devices
   Reveal Solution Discussion Select an answer first
4. 18application · medium

   An administrator needs to send SNMP traps to a network monitoring server for all high-severity alerts. The monitoring server is at 192.168.1.50. Which configuration steps are required?

   • AEnable SNMP trap notifications and add 192.168.1.50 as a trap destination
   • BConfigure syslog forwarding to 192.168.1.50
   • CEnable email notifications and add the monitoring server's email address
   • DSet the alert severity to high and enable all notification channels
   Reveal Solution Discussion Select an answer first
5. 19foundation · easy

   Which notification channel is most appropriate for integrating SD-WAN alerts with an existing network management system that polls devices using SNMP?

   • AEmail
   • BSNMP traps
   • CSMS
   • DSyslog
   Reveal Solution Discussion Select an answer first
6. 20expert · hard

   A network administrator is configuring alerts for a new branch site. The administrator wants to receive notifications for link down events, but not for link utilization or security events. The administrator has enabled the network alert type. What additional configuration is needed to ensure only link down events trigger notifications?

   • AConfigure the notification channel as email
   • BApply a filter for the specific event type 'link down'
   • CSet the alert severity to critical
   • DDisable security alerts
   Reveal Solution Discussion Select an answer first