1.7 Create and Apply Internet of Things (IoT) Security Profiles NETWORK-SECURITY-ANALYST Practice Questions (Page 1)

Questions 1–5

1. 1application · medium

   A logistics company wants to create an IoT security profile for their fleet of GPS trackers. They need to ensure that the trackers can only communicate with the company's tracking server, and they want to block any other communication. What is the first step they should take when creating the IoT security profile?

   • ACreate a security policy rule that allows traffic to the tracking server
   • BSpecify the IoT device type as 'GPS tracker' and define the security settings for that device type
   • CDefine a custom application for the GPS tracker traffic
   • DConfigure the firewall's routing to ensure GPS tracker traffic goes to the tracking server
   Reveal Solution Discussion Select an answer first
2. 2application · medium

   A city's traffic management department wants to enforce an IoT security profile on traffic from traffic light controllers. They have created the profile and now need to apply it. What is the correct way to apply the IoT security profile?

   • AEnable the profile in the firewall's global security settings
   • BAssign the profile to the zone where the traffic light controllers are connected
   • CAttach the profile to a security policy rule that matches traffic from the traffic light controllers
   • DAdd the profile to the interface that connects to the traffic light controllers
   Reveal Solution Discussion Select an answer first
4. 3foundation · easy

   When creating an IoT security profile, what must you specify to define the devices the profile will apply to?

   • AThe IoT device types and their associated security settings
   • BThe network segment where the IoT devices are located
   • CThe IP addresses of the IoT devices
   • DThe MAC addresses of the IoT devices
   Reveal Solution Discussion Select an answer first
5. 4foundation · easy

   What should you check to confirm that an IoT security profile is correctly applied to a security policy rule?

   • AThe firewall's system logs show the profile was created
   • BThe IoT device's firmware version is up to date
   • CThe network's DNS settings are correct
   • DThe policy rule's configuration shows the profile attached
   Reveal Solution Discussion Select an answer first
6. 5foundation · easy

   Which attribute is commonly used in an IoT security profile rule to match traffic?

   • AUser ID
   • BDestination port
   • CIoT device type
   • DSource IP address
   Reveal Solution Discussion Select an answer first