A FlexPod design uses a leaf-spine topology with two spine switches and four leaf switches. The customer requires that a failure of any single switch or link does not cause an outage. Which redundancy mechanism should be implemented between the leaf and spine switches?

Link Aggregation Control Protocol (LACP) across all spine switches

Spanning Tree Protocol (STP) with root guard on all links

Virtual Port Channel (vPC) between all leaf and spine switches

Equal-Cost Multi-Path (ECMP) routing with BGP or OSPF

Which host adapter is commonly used in FlexPod designs to provide converged network connectivity for both data and storage traffic?

Cisco VIC (Virtual Interface Card)

Cisco and NetApp Certified FlexPod Implementation and Administration Specialist

Domain 2Objective 2

Networking Components Supported in FlexPod CISCO-NETAPP-FLEXPOD-IMPLEMENTATION-ADMINISTRATION-SPECIALIST Practice Questions (Page 5)

Part of the FlexPod Design domain, which makes up ~20% of our current practice bank.

22questions here

5free pages

7concepts

Questions 21–22

21application · medium
A FlexPod design uses a leaf-spine topology with two spine switches and four leaf switches. The customer requires that a failure of any single switch or link does not cause an outage. Which redundancy mechanism should be implemented between the leaf and spine switches?
Select an answer first
22foundation · easy
Which host adapter is commonly used in FlexPod designs to provide converged network connectivity for both data and storage traffic?
Select an answer first

Finished these 2 questions?

Review the revealed explanations, or continue through the curriculum.

No more pagesBack to CISCO-NETAPP-FLEXPOD-IMPLEMENTATION-ADMINISTRATION-SPECIALIST

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by NetApp. “CISCO-NETAPP-FLEXPOD-IMPLEMENTATION-ADMINISTRATION-SPECIALIST” is a trademark of its owner, used for identification only.

Networking Components Supported in FlexPod CISCO-NETAPP-FLEXPOD-IMPLEMENTATION-ADMINISTRATION-SPECIALIST Practice Questions (Page 5)

Questions 21–22

A FlexPod design uses a leaf-spine topology with two spine switches and four leaf switches. The customer requires that a failure of any single switch or link does not cause an outage. Which redundancy mechanism should be implemented between the leaf and spine switches?

Which host adapter is commonly used in FlexPod designs to provide converged network connectivity for both data and storage traffic?

Keep studying — FlexPod Design