Storage Systems in Hybrid Cloud Environments CERTIFIED-HYBRID-CLOUD-IMPLEMENTATION-ENGINEER Practice Questions (Page 1)

Questions 1–5

1. 1application · medium

   A company is planning to deploy a hybrid cloud storage solution using NetApp Cloud Volumes ONTAP. They want to ensure that the cloud storage appears as a local resource to their on-premises applications. Which architecture component is essential for this integration?

   • AA VPN or direct connection between the on-premises network and the cloud VPC.
   • BA replication relationship between the on-premises and cloud storage systems.
   • CA public IP address for the cloud storage system.
   • DA dedicated storage gateway appliance on-premises.
   Reveal Solution Discussion Select an answer first
2. 2foundation · easy

   A host cannot connect to a storage system via iSCSI. Which command-line tool would you use to verify that the host can reach the storage system's IP address at the network layer?

   • Atraceroute
   • Bfdisk
   • Ciscsiadm
   • Dping
   Reveal Solution Discussion Select an answer first
4. 3foundation · easy

   Which data protection feature creates a point-in-time, read-only copy of a volume that can be used for quick recovery or testing, without requiring a full copy of the data?

   • ADeduplication
   • BBackup
   • CSnapshot
   • DReplication
   Reveal Solution Discussion Select an answer first
5. 4foundation · easy

   Which storage protocol is a block-level protocol that encapsulates SCSI commands over TCP/IP networks, making it a common choice for IP-based SANs?

   • AiSCSI
   • BFC
   • CSMB
   • DNFS
   Reveal Solution Discussion Select an answer first
6. 5application · medium

   A storage administrator is troubleshooting a connectivity issue between a NetApp storage system and a host. The host can ping the storage LIF, but iSCSI login fails. The administrator has verified that the iSCSI service is enabled on the SVM and the initiator is correctly configured. What should the administrator check next?

   • ACheck the MTU size on the storage and host network interfaces.
   • BEnsure that the host's iSCSI initiator service is running.
   • CConfirm that the storage system has a route to the host's subnet.
   • DVerify that the initiator is in the initiator group and that the LUN is mapped to that group.
   Reveal Solution Discussion Select an answer first