A domain access tunnel is configured, but AD users cannot authenticate. The tunnel status shows 'up'. The administrator checks the DNS configuration and it is correct. What should the administrator check next?

The time synchronization between the SVM and the domain controllers

The AD account used for the tunnel to ensure it has not expired

The SVM's routing table to ensure a route to the domain controllers exists

The firewall rules on the SVM to ensure outbound LDAP traffic is allowed

Which of the following is a common cause of domain access tunnel failure?

Too many AD users in the domain

Excessive storage capacity on the system

Incorrect time zone settings on the storage system

Incorrect DNS configuration preventing domain controller discovery

A company has a NetApp storage system in a segmented network that is not directly reachable from the corporate AD domain. They want to use AD accounts for SMB access to the storage. The security team requires that all authentication traffic be encrypted and that the storage system not be joined to the domain in the traditional sense. What is the best solution?

Set up a VPN between the storage network and the corporate network

Join the storage system to the domain using a CIFS server

Use local accounts on the storage system instead of AD

Configure a domain access tunnel to allow AD authentication without a traditional domain join

What does a successful verification of a domain access tunnel indicate?

The storage system has been assigned a static IP address

All data volumes are accessible to AD users

The storage system has been rebooted successfully

The storage system can communicate with domain controllers and AD authentication is operational

Which type of traffic is primarily carried through a domain access tunnel in a NetApp environment?

Backup and replication data transfers

SNMP monitoring and alert traffic

NFS and SMB file access traffic

Active Directory authentication and authorization traffic

NetAppCertified Cyber Resiliency Expert

Domain 7Objective 4

Configure Domain Access Tunnel for AD Accounts CERTIFIED-CYBER-RESILIENCY-EXPERT Practice Questions (Page 3)

Part of the Cybersecurity Identity and Access Management and Authentication domain, which accounts for 13% of the CERTIFIED-CYBER-RESILIENCY-EXPERT exam. NetApp does not publish an official question count, but from its 90-minute exam (~35–60 total, ~5–8 in this domain), expect 1–1 from this objective — we provide 20 practice questions to prepare you well beyond it. (estimate)

20questions here

4free pages

5concepts

13%of the exam

Questions 11–15

11application · medium
A domain access tunnel is configured, but AD users cannot authenticate. The tunnel status shows 'up'. The administrator checks the DNS configuration and it is correct. What should the administrator check next?
Select an answer first
12foundation · easy
Which of the following is a common cause of domain access tunnel failure?
Select an answer first
13application · medium
A company has a NetApp storage system in a segmented network that is not directly reachable from the corporate AD domain. They want to use AD accounts for SMB access to the storage. The security team requires that all authentication traffic be encrypted and that the storage system not be joined to the domain in the traditional sense. What is the best solution?
Select an answer first
14foundation · easy
What does a successful verification of a domain access tunnel indicate?
Select an answer first
15foundation · easy
Which type of traffic is primarily carried through a domain access tunnel in a NetApp environment?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to CERTIFIED-CYBER-RESILIENCY-EXPERT

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by NetApp. “CERTIFIED-CYBER-RESILIENCY-EXPERT” is a trademark of its owner, used for identification only.