A company is deploying a new service that will require 20 public IPs for various load balancers and NAT gateways. They expect to decommission some resources in the future and want to avoid wasting IPs. They also want to simplify management. What is the most efficient approach?

Create 20 individual public IPs without a prefix.

Create a /28 Public IP Prefix and create public IPs from it as needed.

Create a /26 Public IP Prefix to allow for significant future growth.

Create a /27 Public IP Prefix and create public IPs from it as needed.

When planning IP address spaces for Azure virtual networks, which of the following is a key consideration to avoid overlapping with on-premises networks?

Selecting an address space that does not overlap with on-premises or other Azure virtual networks

Always using a /16 address space to ensure enough IP addresses for future growth

Using the same address space as the on-premises network to simplify routing

Using only public IP address ranges to avoid conflicts with private on-premises networks

A company is deploying a hub-and-spoke topology. In the hub VNet, they need to place an Azure Firewall, a VPN gateway, and Azure Bastion. They also need to deploy a set of VMs that will be managed by Bastion. The hub VNet has a limited address space of 10.0.0.0/24. They want to minimize the number of subnets while ensuring all services can be deployed. Which subnet design should they use?

Create three subnets: one for the firewall, one for the VPN gateway, and one for Bastion and VMs

Create two subnets: one for the firewall and VPN gateway, and one for Bastion and VMs

Create four subnets: one for the firewall, one for the VPN gateway, one for Bastion, and one for the VMs

Create a single subnet for all resources

Microsoft Certified:Azure Network Engineer Associate

Domain 1Objective 1

Design and Implement IP Addressing for Azure Resources AZ-700 Practice Questions (Page 1)

Part of the Design and implement core networking infrastructure domain, which accounts for 25–30% of the AZ-700 exam. Microsoft does not publish an official question count, but from its 100-minute exam (~40–65 total, ~10–20 in this domain), expect 3–5 from this objective — we provide 39 practice questions to prepare you well beyond it. (estimate)

39questions here

8free pages

10concepts

25–30%of the exam

Questions 1–5

1foundation · easy
When configuring subnets in an Azure virtual network, which subnet size is recommended for a virtual network gateway to ensure sufficient IP addresses for future scaling?
Select an answer first
2application · medium
A company has a /24 block of public IP addresses that they own and currently use on-premises. They want to use these IPs in Azure for their public-facing resources. Which Azure feature should they implement?
Select an answer first
3expert · hard
A company is deploying a new service that will require 20 public IPs for various load balancers and NAT gateways. They expect to decommission some resources in the future and want to avoid wasting IPs. They also want to simplify management. What is the most efficient approach?
Select an answer first
4foundation · easy
When planning IP address spaces for Azure virtual networks, which of the following is a key consideration to avoid overlapping with on-premises networks?
Select an answer first
5expert · hard
A company is deploying a hub-and-spoke topology. In the hub VNet, they need to place an Azure Firewall, a VPN gateway, and Azure Bastion. They also need to deploy a set of VMs that will be managed by Bastion. The hub VNet has a limited address space of 10.0.0.0/24. They want to minimize the number of subnets while ensuring all services can be deployed. Which subnet design should they use?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to AZ-700

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Microsoft. “AZ-700” is a trademark of its owner, used for identification only.

Design and Implement IP Addressing for Azure Resources AZ-700 Practice Questions (Page 1)

Questions 1–5

When configuring subnets in an Azure virtual network, which subnet size is recommended for a virtual network gateway to ensure sufficient IP addresses for future scaling?

A company has a /24 block of public IP addresses that they own and currently use on-premises. They want to use these IPs in Azure for their public-facing resources. Which Azure feature should they implement?

A company is deploying a new service that will require 20 public IPs for various load balancers and NAT gateways. They expect to decommission some resources in the future and want to avoid wasting IPs. They also want to simplify management. What is the most efficient approach?

When planning IP address spaces for Azure virtual networks, which of the following is a key consideration to avoid overlapping with on-premises networks?

Keep studying — Design and implement core networking infrastructure