LPI LPIC-2:Linux Engineer (201-450)
Domain 5Objective 1
204.1 Configuring RAID (weight: 3) LPIC-2 Practice Questions (Page 2)
Part of the Topic 204: Advanced Storage Device Administration domain, which makes up ~10% of our current practice bank. Linux Professional Institute does not publish an official question count, but from its 90-minute exam (~35–60 total, ~4–6 in this domain), expect 1–2 from this objective — we provide 20 practice questions to prepare you well beyond it. (estimate)
20questions here
4free pages
5concepts
Questions 6–10
- 6
An administrator wants to monitor a RAID 1 array and receive an email alert if a disk fails. The administrator has configured mdadm to send alerts. Which file must be configured to specify the email address for alerts?
Select an answer first - 7
A Linux system boots from a RAID 1 array containing the root filesystem. After a kernel update, the system fails to boot with a 'md: could not read superblock' error. The administrator suspects the initramfs is missing the RAID support. What should the administrator do to fix this?
Select an answer first - 8
A storage administrator is designing a new system for an archival application that requires maximum usable capacity and can tolerate the loss of any two disks without data loss. The system will have six disks. Which RAID level should be used?
Select an answer first - 9
A RAID 1 array has two disks. One disk fails, and the administrator replaces it with a new disk. The administrator runs mdadm --add /dev/md0 /dev/sdb, and the array begins rebuilding. The administrator wants to monitor the progress of the rebuild. Which command should be used?
Select an answer first - 10
Which RAID level provides both striping and mirroring, requiring at least four disks, and can tolerate the failure of one disk in each mirrored pair?
Select an answer first
Finished these 5 questions?
Review the revealed explanations, or continue through the curriculum.
Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Linux Professional Institute. “LPIC-2” is a trademark of its owner, used for identification only.