A small hosting provider is deploying a rack of headless Linux servers that will be managed exclusively over SSH. The servers have no keyboard, mouse, or monitor attached. During initial POST, one server halts with an error about a missing keyboard. Which BIOS/UEFI setting should the administrator change to allow the server to boot without the keyboard attached?

Disable the integrated USB controller

Change the boot order to boot from the network first

Set 'Halt on Errors' to 'All, but Keyboard'

A server is to be installed in a remote location with no monitor or keyboard. Which configuration is essential for the system to boot successfully?

Enable the 'Onboard LAN Boot ROM'

Disable the 'Wait for F1 if error' option

What is a disadvantage of using DMA for data transfer?

DMA transfers are slower than programmed I/O

DMA requires the CPU to copy each byte

DMA channels are limited and can cause conflicts if not managed properly

DMA is only supported on legacy hardware

What is the purpose of a boot manager in a multi-boot system?

To allow the user to select which operating system to boot

What is the purpose of an IRQ (Interrupt Request) line in a computer system?

To transfer data directly between memory and devices

To supply power to hardware devices

To allow a hardware device to signal the CPU for attention

To provide a unique address for each device

LPI LPIC-1:Linux Administrator (101-500)

Domain 1Objective 1

101.1 Determine and Configure Hardware Settings LPIC-1 Practice Questions (Page 6)

Part of the Topic 101: System Architecture domain, which makes up ~10% of our current practice bank. Linux Professional Institute does not publish an official question count, but from its 90-minute exam (~35–60 total, ~4–6 in this domain), expect 1–2 from this objective — we provide 37 practice questions to prepare you well beyond it. (estimate)

37questions here

8free pages

13concepts

13 Concepts in This Objective

Enable and disable integrated peripherals
Configure systems with or without external peripherals
Differentiate between the various types of mass storage devices
Set the correct hardware ID for different devices
List the advantages and disadvantages of different mass storage devices
Set the correct hardware IRQ
Set the correct hardware DMA
Set the correct hardware I/O port
Set the correct hardware drive letter
Configure a system to use various mass storage devices
Set up a system with multiple operating systems
Use LSPCI, LSMOD, and other tools to identify hardware
List the advantages and disadvantages of different hardware settings

Questions 26–30

26application · medium
A small hosting provider is deploying a rack of headless Linux servers that will be managed exclusively over SSH. The servers have no keyboard, mouse, or monitor attached. During initial POST, one server halts with an error about a missing keyboard. Which BIOS/UEFI setting should the administrator change to allow the server to boot without the keyboard attached?
Select an answer first
27foundation · easy
A server is to be installed in a remote location with no monitor or keyboard. Which configuration is essential for the system to boot successfully?
Select an answer first
28foundation · easy
What is a disadvantage of using DMA for data transfer?
Select an answer first
29foundation · easy
What is the purpose of a boot manager in a multi-boot system?
Select an answer first
30foundation · easy
What is the purpose of an IRQ (Interrupt Request) line in a computer system?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to LPIC-1

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Linux Professional Institute. “LPIC-1” is a trademark of its owner, used for identification only.