What is the purpose of Mist Security Insights?

To monitor and analyze security events from SSR devices

To replace the SSR's built-in security features

To configure security policies on SSR devices

To provide a VPN service for remote users

In the SSR architecture, what is a 'service' in the context of security policy enforcement?

A security zone that groups interfaces

A definition of a network application or protocol, such as HTTP or SSH

A physical interface on the router

A routing protocol like BGP or OSPF

In an SSR stateful firewall rule, which elements are typically used to match traffic?

Source IP, destination IP, and service

URL category, reputation score, and threat level

MAC address, VLAN ID, and interface

Application name, user identity, and device posture

Which SSR security feature is responsible for classifying traffic based on application signatures?

Intrusion Prevention System (IPS)

A company is configuring an SSR to allow branch users to access a specific internal application server (10.10.10.50) on TCP port 443, but they must block all other traffic from the branch subnet (192.168.1.0/24) to that server. The SSR uses service-based policies. What is the most appropriate way to define this rule in the SSR's stateful firewall configuration?

Create a service for TCP 443, then a policy from source 192.168.1.0/24 to destination 10.10.10.50 with that service, and set the default action to deny

Configure a static route for 10.10.10.50 via a firewall appliance and let it filter

Create a policy from source 192.168.1.0/24 to destination 10.10.10.50 with service 'any' and action 'permit'

Apply an ACL on the branch interface that permits TCP 443 to the server and denies all else

Juniper NetworksCertified Professional, Mist AI (JNCIP-MistAI)

Domain 3Objective 4

WAN Edge SSR Security Features JN0-750 Practice Questions (Page 1)

Part of the Juniper Mist Security Solutions domain, which makes up ~30% of our current practice bank. Juniper Networks does not publish an official question count, but from its 90-minute exam (~35–60 total, ~11–18 in this domain), expect 1–2 from this objective — we provide 34 practice questions to prepare you well beyond it. (estimate)

34questions here

7free pages

10concepts

Questions 1–5

1foundation · easy
What is the purpose of Mist Security Insights?
Select an answer first
2foundation · easy
In the SSR architecture, what is a 'service' in the context of security policy enforcement?
Select an answer first
3foundation · easy
In an SSR stateful firewall rule, which elements are typically used to match traffic?
Select an answer first
4foundation · easy
Which SSR security feature is responsible for classifying traffic based on application signatures?
Select an answer first
5application · medium
A company is configuring an SSR to allow branch users to access a specific internal application server (10.10.10.50) on TCP port 443, but they must block all other traffic from the branch subnet (192.168.1.0/24) to that server. The SSR uses service-based policies. What is the most appropriate way to define this rule in the SSR's stateful firewall configuration?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to JN0-750

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Juniper Networks. “JN0-750” is a trademark of its owner, used for identification only.