Which type of configuration is performed on a WAN Edge device in Juniper Mist to define the WAN links?

Configuring the WAN interfaces with IP addresses and gateway information

Configuring the firewall policies for the branch

Configuring the LAN interfaces with VLANs and DHCP

Configuring the routing protocol OSPF on the WAN interfaces

What is a common troubleshooting step for an SD-WAN issue where traffic is not using the expected WAN link?

Check the SD-WAN policy configuration for the affected application

A company is deploying a new WAN Edge device at a remote site. The device needs to be managed by Juniper Mist. What is the first step the administrator should take to onboard the device?

Configure the device's interfaces and WAN links in the Mist portal.

Download the configuration template and apply it to the device via CLI.

Connect the device to the network and wait for it to appear in Mist automatically.

Claim the device in the Mist portal using its serial number.

Which consideration is important when deploying WAN Edge devices across multiple sites?

The device must be configured with a static route to the Mist cloud

Each site must use a different Mist organization

The device must have internet connectivity to reach the Mist cloud for management

All WAN Edge devices must be deployed in the same data center

Which element is typically used in an SD-WAN policy to match traffic for application prioritization?

Source and destination IP addresses

Application signatures or categories

Juniper NetworksCertified Professional, Mist AI (JNCIP-MistAI)

Domain 1Objective 6

WAN Edge and SD-WAN JN0-750 Practice Questions (Page 3)

Part of the Juniper Mist Distributed Enterprise Networks Solutions domain, which makes up ~25% of our current practice bank. Juniper Networks does not publish an official question count, but from its 90-minute exam (~35–60 total, ~9–15 in this domain), expect 2–3 from this objective — we provide 23 practice questions to prepare you well beyond it. (estimate)

23questions here

5free pages

6concepts

Questions 11–15

11foundation · easy
Which type of configuration is performed on a WAN Edge device in Juniper Mist to define the WAN links?
Select an answer first
12foundation · easy
What is a common troubleshooting step for an SD-WAN issue where traffic is not using the expected WAN link?
Select an answer first
13application · easy
A company is deploying a new WAN Edge device at a remote site. The device needs to be managed by Juniper Mist. What is the first step the administrator should take to onboard the device?
Select an answer first
14foundation · easy
Which consideration is important when deploying WAN Edge devices across multiple sites?
Select an answer first
15foundation · easy
Which element is typically used in an SD-WAN policy to match traffic for application prioritization?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to JN0-750

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Juniper Networks. “JN0-750” is a trademark of its owner, used for identification only.