A company is designing a network for a multi-tenant building. Each tenant needs its own isolated Layer 2 broadcast domain and its own Layer 3 routing table for inter-VLAN routing. The network is built on Juniper EX series switches. Which routing instance type should be used for each tenant?

virtual-switch with IRB interfaces

A company wants to use APBR to route Office 365 traffic from a specific VRF to a dedicated MPLS link, while all other traffic from that VRF uses the Internet link. What must be configured to achieve this?

A static route in the VRF for Office 365 subnets pointing to the MPLS link.

A firewall filter applied to the VRF's ingress interface that matches Office 365 traffic and sets the next-hop.

An APBR policy applied to the VRF that matches Office 365 traffic and sets the next-hop to the MPLS link.

A routing policy that matches Office 365 and sets the routing instance to the MPLS VRF.

A service provider wants to offer separate routing tables to multiple customers over a shared infrastructure, using MPLS VPNs. Which routing instance type is designed for this purpose?

virtual routing and forwarding (VRF)

Which routing instance type is used to create a separate Layer 2 forwarding domain with its own MAC address table and VLANs, while still sharing the same physical switch hardware?

virtual routing and forwarding (VRF)

Juniper NetworksCertified Professional, Security (JNCIP-SEC)

Domain 6Objective 3

Routing Instances JN0-637 Practice Questions (Page 2)

Part of the Advanced Policy-Based Routing (APBR) domain, which makes up ~10% of our current practice bank. Juniper Networks does not publish an official question count, but from its 90-minute exam (~35–60 total, ~4–6 in this domain), expect 1–2 from this objective — we provide 16 practice questions to prepare you well beyond it. (estimate)

16questions here

4free pages

4concepts

Questions 6–10

6expert · hard
A company is designing a network for a multi-tenant building. Each tenant needs its own isolated Layer 2 broadcast domain and its own Layer 3 routing table for inter-VLAN routing. The network is built on Juniper EX series switches. Which routing instance type should be used for each tenant?
Select an answer first
7application · medium
A company wants to use APBR to route Office 365 traffic from a specific VRF to a dedicated MPLS link, while all other traffic from that VRF uses the Internet link. What must be configured to achieve this?
Select an answer first
8foundation · easy
A service provider wants to offer separate routing tables to multiple customers over a shared infrastructure, using MPLS VPNs. Which routing instance type is designed for this purpose?
Select an answer first
9foundation · easy
Which routing instance type is used to create a separate Layer 2 forwarding domain with its own MAC address table and VLANs, while still sharing the same physical switch hardware?
Select an answer first
10foundation · easy
Which Junos configuration stanza is used to define a routing instance and its properties, such as instance type and interface assignments?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to JN0-637

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Juniper Networks. “JN0-637” is a trademark of its owner, used for identification only.