Supported Devices JN0-460 Practice Questions (Page 2)

Questions 6–10

1. 6application · medium

   A network admin has a new EX2300 switch that was purchased from a reseller. The switch has never been configured. The admin wants to onboard it to Mist Wired Assurance using the Mist mobile app. What must the admin do first?

   • AConfigure the switch with a static IP address
   • BRegister the switch serial number in the Mist portal
   • CUpgrade the switch to the latest Junos version
   • DConnect the switch to the network and power it on
   Reveal Solution Discussion Select an answer first
2. 7foundation · easy

   Which device role in a Mist-managed network is responsible for aggregating traffic from multiple access switches?

   • AAccess switch
   • BCore switch
   • CDistribution switch
   • DFirewall
   Reveal Solution Discussion Select an answer first
4. 8application · medium

   A company is planning to deploy Mist Wired Assurance in a remote site. The site has an EX3400 switch and an SRX345 firewall. The engineer checks the Mist documentation and finds that the minimum Junos version for EX3400 is 18.1R1 and for SRX345 is 18.2R1. Both devices are running Junos OS 17.4R2. What should the engineer do?

   • AOnboard both devices as-is; the versions are close enough
   • BUpgrade both devices to the required minimum versions
   • CUpgrade only the EX3400, as the SRX345 is not supported
   • DUpgrade only the SRX345, as the EX3400 is not supported
   Reveal Solution Discussion Select an answer first
5. 9application · medium

   A network administrator has a stack of EX3400 switches that need to be managed by Mist Wired Assurance. The switches are new and have never been configured. What is the recommended method to onboard these switches to the Mist cloud?

   • AUse the Mist mobile app to scan the QR code on each switch
   • BShip the switches to Juniper for pre-configuration
   • CConnect to each switch via console and manually configure the Mist cloud credentials
   • DUse Zero Touch Provisioning (ZTP) with DHCP options to automatically claim the switches
   Reveal Solution Discussion Select an answer first
6. 10application · medium

   A network engineer is onboarding an EX3400 switch to Mist Wired Assurance. The switch is running Junos OS 18.1R1, which meets the minimum requirement. The engineer has the switch's serial number and wants to claim it via the Mist portal. What additional information is required to complete the claim?

   • AThe switch's MAC address
   • BThe switch's management IP address
   • CThe Mist site ID where the switch will be assigned
   • DThe switch's root password
   Reveal Solution Discussion Select an answer first