How does Mist Wired Assurance use client data in SLE computation?

To associate network performance with specific client devices and their behavior

To identify the client's operating system and browser version

To authenticate clients and enforce access policies

To determine the physical location of the client for asset tracking

A network admin is investigating a wired SLE issue where the 'Throughput' score is low for a specific site, but 'Latency' and 'Packet Loss' are normal. Upon checking the switch, they find that the port connected to the access switch is operating at 100 Mbps instead of 1 Gbps. What is the most likely cause and corrective action?

The switch is overloaded; upgrade the switch

The client is using a slow NIC; replace the client's NIC

The VLAN is misconfigured; change the VLAN assignment

The cable is faulty or the port is misconfigured; replace the cable or fix the port configuration

A network admin wants to understand why the SLE score for a specific wired client is lower than the site average. They have already checked the client's port speed and it is correct. What is the next best step to identify the root cause?

Drill down into the client's SLE details to see which specific metric is failing

A network admin is troubleshooting a wired client that is experiencing slow performance. The SLE score for 'Throughput' is low, but the client is connected at 1 Gbps. The admin suspects the issue is on the client side. How can they confirm this using Mist?

Check the client's SLE details to see if the throughput issue is isolated to this client or affects all clients on the same switch

Juniper NetworksCertified Specialist, Mist AI Wired (JNCIS-MistAI)

Domain 3Objective 4

Service Level Expectations JN0-460 Practice Questions (Page 3)

Part of the Wired Assurance Management or Operations domain, which makes up ~24% of our current practice bank. Juniper Networks does not publish an official question count, but from its 90-minute exam (~35–60 total, ~8–14 in this domain), expect 1–2 from this objective — we provide 27 practice questions to prepare you well beyond it. (estimate)

27questions here

6free pages

6concepts

Questions 11–15

11foundation · easy
How does Mist Wired Assurance use client data in SLE computation?
Select an answer first
12expert · medium
A network admin is investigating a wired SLE issue where the 'Throughput' score is low for a specific site, but 'Latency' and 'Packet Loss' are normal. Upon checking the switch, they find that the port connected to the access switch is operating at 100 Mbps instead of 1 Gbps. What is the most likely cause and corrective action?
Select an answer first
13foundation · easy
Which of the following is an SLE category in Mist Wired Assurance?
Select an answer first
14expert · medium
A network admin wants to understand why the SLE score for a specific wired client is lower than the site average. They have already checked the client's port speed and it is correct. What is the next best step to identify the root cause?
Select an answer first
15expert · medium
A network admin is troubleshooting a wired client that is experiencing slow performance. The SLE score for 'Throughput' is low, but the client is connected at 1 Gbps. The admin suspects the issue is on the client side. How can they confirm this using Mist?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to JN0-460

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Juniper Networks. “JN0-460” is a trademark of its owner, used for identification only.

Service Level Expectations JN0-460 Practice Questions (Page 3)

Questions 11–15

How does Mist Wired Assurance use client data in SLE computation?

Which of the following is an SLE category in Mist Wired Assurance?

A network admin wants to understand why the SLE score for a specific wired client is lower than the site average. They have already checked the client's port speed and it is correct. What is the next best step to identify the root cause?

A network admin is troubleshooting a wired client that is experiencing slow performance. The SLE score for 'Throughput' is low, but the client is connected at 1 Gbps. The admin suspects the issue is on the client side. How can they confirm this using Mist?

Keep studying — Wired Assurance Management or Operations