What is the primary function of VXLAN in a campus fabric?

To replace the need for IP addressing on end devices

To provide a management channel between switches

To encapsulate Layer 2 frames in IP packets for transport over the underlay

To provide a routing protocol for the underlay network

In a campus fabric IP Clos architecture, what is the primary purpose of the spine layer?

To provide network services such as DHCP and DNS

To provide high-speed, non-blocking connectivity between leaf switches

To enforce security policies between different VLANs

To connect end-user devices and access points to the network

Which type of traffic flow in an IP Clos fabric is typically referred to as 'east-west' traffic?

Traffic between a client and the internet

Traffic between devices on different leaf switches

Traffic between the campus fabric and a remote branch

Traffic between a leaf switch and a spine switch

What is the purpose of ECMP (Equal-Cost Multipath) in an IP Clos fabric?

To load-balance traffic across multiple equal-cost paths

To reduce the number of paths in the fabric

To provide a single path for all traffic to simplify troubleshooting

To provide a backup path only when the primary path fails

How does an IP Clos campus fabric scale to support more end devices?

By replacing existing leaf switches with higher-capacity models

By adding more spine switches to increase the number of leaf ports

By adding more leaf switches and connecting them to all existing spines

By adding more VLANs to the existing switches

Juniper NetworksCertified Specialist, Mist AI Wired (JNCIS-MistAI)

Domain 4Objective 3

Campus Fabric IP Clos JN0-460 Practice Questions (Page 4)

Part of the Campus Fabric Architecture domain, which makes up ~23% of our current practice bank. Juniper Networks does not publish an official question count, but from its 90-minute exam (~35–60 total, ~8–14 in this domain), expect 1–2 from this objective — we provide 26 practice questions to prepare you well beyond it. (estimate)

26questions here

6free pages

8concepts

Questions 16–20

16foundation · easy
What is the primary function of VXLAN in a campus fabric?
Select an answer first
17foundation · easy
In a campus fabric IP Clos architecture, what is the primary purpose of the spine layer?
Select an answer first
18foundation · easy
Which type of traffic flow in an IP Clos fabric is typically referred to as 'east-west' traffic?
Select an answer first
19foundation · easy
What is the purpose of ECMP (Equal-Cost Multipath) in an IP Clos fabric?
Select an answer first
20foundation · easy
How does an IP Clos campus fabric scale to support more end devices?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to JN0-460

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Juniper Networks. “JN0-460” is a trademark of its owner, used for identification only.