Service Level Expectations (SLEs) / Juniper Mist Wireless Assurance JN0-452 Practice Questions (Page 4)

Questions 16–20

1. 16foundation · easy

   What is the benefit of SLE integration with Marvis AI?

   • AIt automatically fixes all wireless issues
   • BIt enables proactive troubleshooting by identifying issues before they impact users
   • CIt eliminates the need for manual network monitoring
   • DIt provides a direct interface to the AP's operating system
   Reveal Solution Discussion Select an answer first
2. 17application · medium

   A logistics company's 'Throughput' SLE is 85%. The team filters by the 'Shipping' site and sees that the score is 95% there, but the 'Office' site is 70%. They also notice that the Office site has a higher number of clients per AP. Which SLE metric is most likely the root cause of the low throughput at the Office site?

   • ARoaming
   • BCapacity
   • CCoverage
   • DSuccessful Connects
   Reveal Solution Discussion Select an answer first
4. 18application · medium

   A hospital's IT team is investigating a complaint from nursing staff that Wi-Fi calls drop when moving between patient rooms. The Mist dashboard shows the 'Roaming' SLE at 92%, 'Successful Connects' at 99%, and 'Throughput' at 95%. The team filters the Roaming SLE by the affected floor and time window. Which additional filter would most directly help isolate whether the issue is caused by sticky clients versus AP coverage gaps?

   • AFilter by authentication method (802.1X vs PSK)
   • BFilter by AP and view the per-AP Roaming SLE breakdown
   • CFilter by client device type and OS version
   • DFilter by SSID to see if only the clinical SSID is affected
   Reveal Solution Discussion Select an answer first
5. 19expert · hard

   An airport's 'Throughput' SLE is 90%, but the 'Capacity' SLE is 75%. The team notices that the Capacity SLE is calculated based on the number of clients per AP and the airtime utilization. They also see that the 'Coverage' SLE is 98%. Which conclusion is best supported by these SLE values?

   • AThe network has a roaming problem that is causing clients to stay on distant APs
   • BThe network has a DHCP problem that is preventing clients from getting IP addresses
   • CThe network has too many clients per AP, causing airtime contention even though signal strength is adequate
   • DThe network has a coverage problem that is causing clients to use lower data rates
   Reveal Solution Discussion Select an answer first
6. 20application · medium

   A convention center's 'Successful Connects' SLE is 95%, but Marvis reports a 'DHCP timeout' anomaly for a specific vendor's IoT devices. The team wants to use Marvis to understand the impact and potential fix. Which Marvis feature provides the most direct actionable insight?

   • AMarvis Reports, which shows historical SLE trends
   • BMarvis Conversations, which explains the anomaly in natural language
   • CThe SLE dashboard's 'Successful Connects' drill-down to see the client list
   • DMarvis Actions, which recommends specific configuration changes
   Reveal Solution Discussion Select an answer first