In the Security Director onboarding workflow, what typically occurs after a device is discovered and added?

The device's local administrator account is disabled

The device is automatically deleted if it does not respond to ping

The device is configured and then validated to ensure it is manageable

The device is immediately placed into production and starts enforcing policies

A security team is onboarding 15 branch SRX devices. They want to ensure all devices have the same syslog server, NTP server, and SNMP community string configured. They also want to allow per-device customization of the hostname and management IP. What is the most efficient approach in Security Director?

Create a template with all settings including hostname and management IP, then apply it to all devices.

Use the device discovery feature to auto-configure all settings from the device's existing configuration.

Create a configuration template with the common settings, apply it to all devices, then manually update the hostname and management IP on each device.

Manually configure each device individually in Security Director to ensure full control over every setting.

After onboarding a new SRX device, an administrator notices that the device status is 'In Sync' but the configuration pushed from Security Director does not appear in the device's active configuration. What should the administrator check first?

Whether the configuration was committed on the device after the push.

Whether the device's management IP is reachable from the Security Director server.

Whether the device's root password is set to the default.

Whether the device's software version supports the pushed configuration syntax.

A company is onboarding a mix of SRX300 and SRX1500 devices. They want to apply a configuration template that includes settings for both device models. However, the template application fails on the SRX300 devices but succeeds on the SRX1500 devices. What is the most likely cause?

The SRX300 devices are not part of the same template group as the SRX1500 devices.

The SRX300 devices have a different root password than the SRX1500 devices.

The template contains settings that are not supported on the SRX300 platform.

The SRX300 devices have a different management IP than the SRX1500 devices.

Juniper NetworksCertified Specialist, Security (JNCIS-SEC)

Domain 7Objective 2

Onboarding Devices JN0-336 Practice Questions (Page 3)

Part of the Security Director domain, which makes up ~8% of our current practice bank. Juniper Networks does not publish an official question count, but from its 90-minute exam (~35–60 total, ~3–5 in this domain), expect 1–2 from this objective — we provide 18 practice questions to prepare you well beyond it. (estimate)

18questions here

4free pages

4concepts

Questions 11–15

11foundation · easy
In the Security Director onboarding workflow, what typically occurs after a device is discovered and added?
Select an answer first
12application · medium
A security team is onboarding 15 branch SRX devices. They want to ensure all devices have the same syslog server, NTP server, and SNMP community string configured. They also want to allow per-device customization of the hostname and management IP. What is the most efficient approach in Security Director?
Select an answer first
13application · medium
After onboarding a new SRX device, an administrator notices that the device status is 'In Sync' but the configuration pushed from Security Director does not appear in the device's active configuration. What should the administrator check first?
Select an answer first
14foundation · easy
Which status indicator would you check to confirm that an onboarded device is successfully connected to Security Director?
Select an answer first
15expert · hard
A company is onboarding a mix of SRX300 and SRX1500 devices. They want to apply a configuration template that includes settings for both device models. However, the template application fails on the SRX300 devices but succeeds on the SRX1500 devices. What is the most likely cause?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to JN0-336

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Juniper Networks. “JN0-336” is a trademark of its owner, used for identification only.

Onboarding Devices JN0-336 Practice Questions (Page 3)

Questions 11–15

In the Security Director onboarding workflow, what typically occurs after a device is discovered and added?

After onboarding a new SRX device, an administrator notices that the device status is 'In Sync' but the configuration pushed from Security Director does not appear in the device's active configuration. What should the administrator check first?

Which status indicator would you check to confirm that an onboarded device is successfully connected to Security Director?

A company is onboarding a mix of SRX300 and SRX1500 devices. They want to apply a configuration template that includes settings for both device models. However, the template application fails on the SRX300 devices but succeeds on the SRX1500 devices. What is the most likely cause?

Keep studying — Security Director