An administrator is configuring Juniper Secure Connect on an SRX firewall. The administrator needs to ensure that the Secure Connect Gateway is reachable by remote clients over the internet. Which configuration step is essential for this to work?

Enable the DHCP server on the SRX to assign IP addresses to remote clients.

Assign a public IP address to the Secure Connect Gateway interface and ensure the required ports are open in the security policy.

Create a user account on the SRX for each remote client.

Configure a site-to-site VPN tunnel to the remote clients' networks.

How does Juniper Secure Connect integrate with existing security policies on an SRX device?

By using the same security policies that apply to other traffic

By requiring a separate firewall zone for VPN traffic

By bypassing all security policies

By creating a separate virtual router for VPN traffic

Which authentication method can be configured for Juniper Secure Connect clients?

Local authentication using usernames and passwords stored on the SRX

Where does the Juniper Secure Connect Gateway reside in the network architecture?

On the SRX Series device as a software feature

In the cloud as a managed service

On the user's endpoint device as a software application

On a dedicated hardware appliance separate from the firewall

Which configuration step is required to enable Juniper Secure Connect on an SRX Series device?

Define a secure connect gateway with an interface and a hostname

Install a third-party VPN client on the SRX

Create a static route to the client's IP address

Configure a GRE tunnel to the client

Juniper NetworksCertified Specialist, Security (JNCIS-SEC)

Domain 2Objective 4

Juniper Secure Connect JN0-336 Practice Questions (Page 4)

Part of the IPsec VPN domain, which makes up ~16% of our current practice bank. Juniper Networks does not publish an official question count, but from its 90-minute exam (~35–60 total, ~6–10 in this domain), expect 1–2 from this objective — we provide 23 practice questions to prepare you well beyond it. (estimate)

23questions here

5free pages

6concepts

Questions 16–20

16application · medium
An administrator is configuring Juniper Secure Connect on an SRX firewall. The administrator needs to ensure that the Secure Connect Gateway is reachable by remote clients over the internet. Which configuration step is essential for this to work?
Select an answer first
17foundation · easy
How does Juniper Secure Connect integrate with existing security policies on an SRX device?
Select an answer first
18foundation · easy
Which authentication method can be configured for Juniper Secure Connect clients?
Select an answer first
19foundation · easy
Where does the Juniper Secure Connect Gateway reside in the network architecture?
Select an answer first
20foundation · easy
Which configuration step is required to enable Juniper Secure Connect on an SRX Series device?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to JN0-336

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Juniper Networks. “JN0-336” is a trademark of its owner, used for identification only.