Campus LAN Design JN0-1103 Practice Questions (Page 2)

Questions 6–10

1. 6foundation · easy

   What is a primary benefit of using EVPN-VXLAN in a campus network?

   • AIt provides Layer 2 connectivity over a Layer 3 underlay, enabling scalability and flexibility
   • BIt requires a dedicated physical network for each tenant
   • CIt eliminates the need for IP addressing
   • DIt replaces all routing protocols
   Reveal Solution Discussion Select an answer first
2. 7application · medium

   A hospital is deploying a new campus network. The security policy requires that only authorized medical devices can connect to the network, and that guest users must be isolated from the internal network. The network team wants to enforce this at the access layer. Which combination of access control mechanisms should they implement?

   • ARole-based access control (RBAC) on the core switches only
   • BPort security with MAC address limiting on all access ports
   • C802.1X for all wired and wireless users, with a guest VLAN for unauthenticated devices
   • DA firewall between the access and distribution layers
   Reveal Solution Discussion Select an answer first
4. 8foundation · easy

   Which layer in a modular campus network is typically where user devices connect and where port security and QoS classification are often applied?

   • ADistribution layer
   • BAccess layer
   • CEdge layer
   • DCore layer
   Reveal Solution Discussion Select an answer first
5. 9application · medium

   A network engineer is designing the core layer of a campus network. The core switches will connect to distribution switches from multiple buildings. The engineer wants to ensure that the core does not become a bottleneck. Which design practice should they follow?

   • AUse the same oversubscription ratio at all layers
   • BDo not use oversubscription at the core; connect every distribution switch directly to the core
   • CUse a lower oversubscription ratio at the core than at the access layer
   • DUse a higher oversubscription ratio at the core to save cost
   Reveal Solution Discussion Select an answer first
6. 10expert · hard

   A large enterprise is considering EVPN-VXLAN for its campus network to support multi-tenancy and scalability. The network team is concerned about the complexity of deploying EVPN-VXLAN and is considering a traditional spanning-tree-based design instead. Which factor should they consider when making this decision?

   • AEVPN-VXLAN is only suitable for data center networks, not campus networks
   • BEVPN-VXLAN requires a full mesh of IBGP sessions between all switches
   • CTraditional spanning-tree design is always simpler and more reliable than EVPN-VXLAN
   • DEVPN-VXLAN provides better scalability and segmentation but requires more complex configuration and troubleshooting
   Reveal Solution Discussion Select an answer first