2.3 Configuring Network Connectivity Center. Considerations Include: PROFESSIONAL-CLOUD-NETWORK-ENGINEER Practice Questions (Page 1)

Questions 1–5

1. 1foundation · easy

   Which Google Cloud service is used to monitor Network Connectivity Center health and traffic?

   • ACloud Audit Logs
   • BCloud Logging
   • CCloud Trace
   • DCloud Monitoring
   Reveal Solution Discussion Select an answer first
2. 2foundation · easy

   In a hub and spokes topology, what is the role of the hub?

   • AIt is a backup for spoke failures.
   • BIt provides direct connectivity between spokes without routing.
   • CIt acts as a central point for routing traffic between spokes.
   • DIt is used only for on-premises connectivity.
   Reveal Solution Discussion Select an answer first
4. 3foundation · easy

   What is the purpose of PSC propagation in Network Connectivity Center?

   • ATo allow service consumers to access producer services through the hub.
   • BTo propagate routes between VPC spokes.
   • CTo monitor traffic between spokes.
   • DTo translate private IP addresses for on-premises connectivity.
   Reveal Solution Discussion Select an answer first
5. 4foundation · easy

   What is a common cause of route propagation failure in Network Connectivity Center?

   • AThe spoke is not attached to the hub.
   • BThe hub is using a different VPC network.
   • CThe hub is not in the same region as the spoke.
   • DThe spoke has too many routes.
   Reveal Solution Discussion Select an answer first
6. 5foundation · easy

   When configuring Private NAT in Network Connectivity Center, what is a key requirement?

   • AYou must define a NAT IP range that does not overlap with the destination network.
   • BThe source and destination networks must have overlapping IP ranges.
   • CThe NAT must be associated with a public IP address.
   • DThe NAT must be configured on the hub.
   Reveal Solution Discussion Select an answer first