What is the purpose of an OSPF virtual link?

To connect two backbone areas together

To connect a non-backbone area to the backbone area through another non-backbone area

To replace a physical link between two routers

To increase the bandwidth of an OSPF link

Two FortiGate devices are connected via a point-to-point link and are configured for OSPF. The adjacency is stuck in the ExStart state. The engineer verifies that the MTU is consistent on both sides. Which other parameter should be checked?

The OSPF interface type on both devices.

The OSPF hello and dead timers on both devices.

The OSPF router ID on both devices.

The OSPF authentication type on both devices.

In a broadcast multi-access network, which router is elected to minimize the number of adjacencies and reduce routing update traffic?

Autonomous System Boundary Router (ASBR)

FortinetNSE 7 - Enterprise Firewall Administrator

Domain 4Objective 1

Implement OSPF to Route Enterprise Traffic NSE7-ENTERPRISE-FIREWALL-ADMINISTRATOR Practice Questions (Page 3)

Part of the Routing domain, which makes up ~13% of our current practice bank. Fortinet does not publish an official question count, but from its 70-minute exam (~30–45 total, ~4–6 in this domain), expect 2–3 from this objective — we provide 15 practice questions to prepare you well beyond it. (estimate)

15questions here

3free pages

8concepts

Questions 11–15

11foundation · easy
What is the purpose of an OSPF virtual link?
Select an answer first
12foundation · easy
What is the default OSPF cost of an interface with a bandwidth of 100 Mbps?
Select an answer first
13application · medium
Two FortiGate devices are connected via a point-to-point link and are configured for OSPF. The adjacency is stuck in the ExStart state. The engineer verifies that the MTU is consistent on both sides. Which other parameter should be checked?
Select an answer first
14foundation · easy
In a broadcast multi-access network, which router is elected to minimize the number of adjacencies and reduce routing update traffic?
Select an answer first
15foundation · easy
Which LSA type is used by an ASBR to advertise external routes into an NSSA?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

No more pagesBack to NSE7-ENTERPRISE-FIREWALL-ADMINISTRATOR

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Fortinet. “NSE7-ENTERPRISE-FIREWALL-ADMINISTRATOR” is a trademark of its owner, used for identification only.

Implement OSPF to Route Enterprise Traffic NSE7-ENTERPRISE-FIREWALL-ADMINISTRATOR Practice Questions (Page 3)

Questions 11–15

What is the purpose of an OSPF virtual link?

What is the default OSPF cost of an interface with a bandwidth of 100 Mbps?

Two FortiGate devices are connected via a point-to-point link and are configured for OSPF. The adjacency is stuck in the ExStart state. The engineer verifies that the MTU is consistent on both sides. Which other parameter should be checked?

In a broadcast multi-access network, which router is elected to minimize the number of adjacencies and reduce routing update traffic?

Which LSA type is used by an ASBR to advertise external routes into an NSSA?

Keep studying — Routing