A network administrator is configuring an FGCP active-passive HA pair. They want to ensure that if the active unit fails, the standby unit can continue processing existing user sessions without interruption. What must be configured on the cluster?

Link failover and heartbeat monitoring

Session synchronization and session pickup

Virtual clustering and load balancing

An administrator has configured an FGCP active-passive HA cluster. They want to ensure that if the active unit loses connectivity on its WAN interface, the standby unit takes over. What should they configure?

Increase the heartbeat interval.

Set the HA mode to active-active.

Enable session pickup and synchronize sessions.

Enable link failover and monitor the WAN interface.

In an FGCP active-active HA cluster, the administrator wants to ensure that if one unit fails, the other unit can continue processing all active sessions without interruption. What is required for this to work?

Session synchronization between the units

Load balancing algorithm set to round-robin

Virtual clustering with multiple virtual cluster IDs

Link failover on all interfaces

What is the purpose of session synchronization in an FGCP HA cluster?

To ensure that all sessions are terminated and re-established after a failover

To balance the load of sessions between active and standby units

To synchronize the configuration of all FortiGate units in the cluster

To maintain stateful failover by replicating session information to the standby unit

FortinetNSE 7 - Enterprise Firewall Administrator

Domain 1Objective 3

Configure Different Operation Modes for an HA Cluster NSE7-ENTERPRISE-FIREWALL-ADMINISTRATOR Practice Questions (Page 1)

Part of the System Configuration domain, which makes up ~32% of our current practice bank. Fortinet does not publish an official question count, but from its 70-minute exam (~30–45 total, ~10–14 in this domain), expect 2–3 from this objective — we provide 17 practice questions to prepare you well beyond it. (estimate)

17questions here

4free pages

5concepts

Questions 1–5

1application · medium
A network administrator is configuring an FGCP active-passive HA pair. They want to ensure that if the active unit fails, the standby unit can continue processing existing user sessions without interruption. What must be configured on the cluster?
Select an answer first
2application · medium
An organization has multiple FortiGate units that they want to group into a single logical device for management and failover. They want to be able to configure policies once and have them apply to all units. Which HA feature should they use?
Select an answer first
3application · medium
An administrator has configured an FGCP active-passive HA cluster. They want to ensure that if the active unit loses connectivity on its WAN interface, the standby unit takes over. What should they configure?
Select an answer first
4application · medium
In an FGCP active-active HA cluster, the administrator wants to ensure that if one unit fails, the other unit can continue processing all active sessions without interruption. What is required for this to work?
Select an answer first
5foundation · easy
What is the purpose of session synchronization in an FGCP HA cluster?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to NSE7-ENTERPRISE-FIREWALL-ADMINISTRATOR

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Fortinet. “NSE7-ENTERPRISE-FIREWALL-ADMINISTRATOR” is a trademark of its owner, used for identification only.