Register Devices in ADOMs NSE6-FORTIMANAGER-ADMINISTRATOR Practice Questions (Page 3)

Questions 11–15

1. 11application · medium

   An organization is deploying a FortiGate 6300F chassis. The admin needs to apply a provisioning template that configures the chassis-level settings (like HA mode) and also ensures that all modules receive the same policy. What is the correct way to apply the template?

   • ACreate a template for the chassis and a separate template for each module type.
   • BApply the template to the chassis device in FortiManager; it will be pushed to all modules.
   • CUse a CLI script to configure the chassis, then manually configure each module.
   • DApply the template separately to each FPM and FIM module in the chassis.
   Reveal Solution Discussion Select an answer first
2. 12foundation · easy

   What is the purpose of device discovery in FortiManager?

   • ATo monitor the health status of already managed devices.
   • BTo automatically detect and add unmanaged FortiGate devices to the ADOM.
   • CTo synchronize policies between FortiManager and FortiAnalyzer.
   • DTo upgrade firmware on all managed devices automatically.
   Reveal Solution Discussion Select an answer first
4. 13expert · hard

   An admin is deploying a mix of FortiGate models, including some chassis-based units. The admin wants to use a single provisioning template that applies to all devices, but the chassis devices require additional configuration (e.g., module-specific settings). What is the best approach?

   • AUse a CLI script that checks the device model and applies the appropriate settings.
   • BCreate separate templates for chassis and non-chassis devices, and assign them to the respective ADOMs.
   • CCreate a single template that includes all possible settings, and apply it to all devices.
   • DUse a single template for all devices, and manually configure the chassis-specific settings after registration.
   Reveal Solution Discussion Select an answer first
5. 14application · medium

   A network admin is deploying 50 FortiGate firewalls across remote branch offices. Each device must receive a unique hostname, a common set of interface IPs (with only the WAN IP varying), and identical firewall policies. The admin wants to minimize manual per-device configuration during registration. Which approach should the admin use in FortiManager?

   • AManually configure one device, then use the 'Clone Device' feature to duplicate it to the other 49 units.
   • BRegister each device manually, then use the CLI template to push the unique hostname and interface configuration.
   • CRely on the FGFM protocol to automatically sync all settings from the first configured device to the rest.
   • DUse a provisioning template with variables for the hostname and WAN IP, and apply it during automatic registration.
   Reveal Solution Discussion Select an answer first
6. 15expert · hard

   A company has multiple ADOMs (e.g., 'Prod' and 'Dev'). The admin wants to use device discovery to automatically add FortiGates to the correct ADOM. However, the admin is concerned that devices might be added to the wrong ADOM if the discovery is not configured correctly. What is the best practice to ensure devices are added to the correct ADOM?

   • AEnable device discovery in each ADOM and configure the FortiGates to register to the specific ADOM.
   • BDisable device discovery and manually add all devices to their respective ADOMs.
   • CEnable device discovery only in the 'Root' ADOM and manually move devices to the correct ADOM afterward.
   • DUse automatic ADOM assignment rules based on the device's IP subnet.
   Reveal Solution Discussion Select an answer first