FortinetNSE 5 - FortiSwitch Administrator
Domain 1Objective 5
Configure STP to Prevent Network Loops NSE5-FORTISWITCH-ADMINISTRATOR Practice Questions (Page 5)
Part of the FortiSwitch Concepts domain, which makes up ~45% of our current practice bank.
23questions here
5free pages
7concepts
Questions 21–23
- 21
What is the default STP bridge priority on a FortiSwitch?
Select an answer first - 22
A network has two FortiSwitch switches connected by two redundant links. The administrator notices that one of the links is in blocking state and the other is in forwarding state. The network team wants to use both links for load balancing. Which STP feature should be enabled to allow both links to forward traffic for different VLANs?
Select an answer first - 23
A FortiSwitch is connected to another switch via two redundant links. The network team notices that occasionally one of the links experiences a unidirectional failure where the receive fiber is damaged but the transmit fiber still works. This causes the port to remain in a forwarding state, creating a loop. The administrator wants to prevent this loop without disabling the redundant link. What should be configured on the FortiSwitch ports connected to the redundant links?
Select an answer first
Finished these 3 questions?
Review the revealed explanations, or continue through the curriculum.
No more pagesBack to NSE5-FORTISWITCH-ADMINISTRATOR
Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Fortinet. “NSE5-FORTISWITCH-ADMINISTRATOR” is a trademark of its owner, used for identification only.