How can a FortiSwitch firmware upgrade be performed when the switch is managed via FortiLink?

By uploading the firmware directly to the FortiSwitch's local web interface.

By connecting to the switch's console port and using TFTP.

By sending a CLI command from the FortiGate to the switch to download firmware from a remote server.

By using the FortiGate's GUI to upload the firmware image and apply it to the switch.

An organization needs to upgrade the firmware on all FortiSwitch devices managed by a FortiGate. What is the recommended method to perform this upgrade?

Use the FortiGate's GUI to upgrade each FortiSwitch individually

Download the firmware to a USB drive and insert it into each switch

Connect to each FortiSwitch via SSH and run the upgrade command

Upgrade the FortiGate firmware, which automatically upgrades all switches

Which statement accurately describes FortiLink's role in a FortiSwitch deployment?

FortiLink is a Layer 2 protocol that only carries data traffic between FortiGate and FortiSwitch.

FortiLink is a routing protocol that replaces OSPF for inter-switch communication.

FortiLink is a wireless protocol used to connect FortiAP devices to FortiSwitch.

FortiLink is a management protocol that also carries data traffic, allowing the FortiGate to control the switch.

What is the purpose of configuring a VLAN interface on the FortiGate for a FortiLink-managed switch?

To allow the FortiSwitch to connect to the internet independently.

To enable routing between VLANs on the FortiSwitch itself.

To provide a management IP address for the FortiSwitch on that VLAN.

To create a separate broadcast domain for the FortiLink protocol.

An administrator has created a new VLAN on the FortiGate for a guest network. The VLAN is propagated to all managed FortiSwitch devices, but the guest devices cannot access the internet. The VLAN is correctly assigned to the access ports. What is the most likely cause?

The FortiSwitch's STP is blocking the ports

The guest devices have the wrong IP address

The FortiSwitch is not authorized

The VLAN is not allowed on the FortiLink trunk

FortinetNSE 5 - FortiSwitch Administrator

Domain 2Objective 1

Configure and Provision FortiSwitch NSE5-FORTISWITCH-ADMINISTRATOR Practice Questions (Page 2)

Part of the Deployment and Management domain, which makes up ~22% of our current practice bank.

23questions here

5free pages

7concepts

Questions 6–10

6foundation · easy
How can a FortiSwitch firmware upgrade be performed when the switch is managed via FortiLink?
Select an answer first
7application · medium
An organization needs to upgrade the firmware on all FortiSwitch devices managed by a FortiGate. What is the recommended method to perform this upgrade?
Select an answer first
8foundation · easy
Which statement accurately describes FortiLink's role in a FortiSwitch deployment?
Select an answer first
9foundation · easy
What is the purpose of configuring a VLAN interface on the FortiGate for a FortiLink-managed switch?
Select an answer first
10expert · hard
An administrator has created a new VLAN on the FortiGate for a guest network. The VLAN is propagated to all managed FortiSwitch devices, but the guest devices cannot access the internet. The VLAN is correctly assigned to the access ports. What is the most likely cause?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to NSE5-FORTISWITCH-ADMINISTRATOR

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Fortinet. “NSE5-FORTISWITCH-ADMINISTRATOR” is a trademark of its owner, used for identification only.