Determine the Egress Source IP Based on Configuration F5CAB2 Practice Questions (Page 3)

Questions 11–15

1. 11expert · hard

   A BIG-IP has a virtual server with SNAT Automap enabled. The egress VLAN has self-IPs 10.0.0.1 and 10.0.0.2. The backend server is on the same subnet as these self-IPs. A client connects to the virtual server. What source IP will the backend server see?

   • A10.0.0.1, the lowest IP address on the egress VLAN.
   • BThe client's original IP, because the backend is on the same subnet.
   • CEither 10.0.0.1 or 10.0.0.2, but consistently for the same client.
   • D10.0.0.2, the highest IP address on the egress VLAN.
   Reveal Solution Discussion Select an answer first
2. 12expert · hard

   A BIG-IP has a SNAT pool with IPs 10.0.0.10 and 10.0.0.11 in route domain 0, and 10.0.1.10 and 10.0.1.11 in route domain 1. A virtual server in route domain 0 uses this SNAT pool. A client in route domain 0 connects to the virtual server. What source IP will the backend server (in route domain 0) see?

   • AThe self-IP of the BIG-IP in route domain 0.
   • BThe client's original IP, because the SNAT pool is not in the same route domain.
   • CEither 10.0.1.10 or 10.0.1.11, based on a hash of the client IP.
   • DEither 10.0.0.10 or 10.0.0.11, based on a hash of the client IP.
   Reveal Solution Discussion Select an answer first
4. 13foundation · easy

   A virtual server is configured with a SNAT pool. How does the BIG-IP determine the egress source IP for a new connection?

   • AIt selects an address from the SNAT pool
   • BIt uses the virtual server's destination IP address
   • CIt uses the client's source IP address
   • DIt uses a self-IP address of the BIG-IP
   Reveal Solution Discussion Select an answer first
5. 14foundation · easy

   A BIG-IP virtual server is configured with a SNAT. When a client connects to the virtual server and the BIG-IP forwards the request to a pool member, what source IP address will the pool member see?

   • AThe pool member's own IP address
   • BThe IP address specified by the SNAT configuration
   • CThe virtual server's destination IP address
   • DThe client's original source IP address
   Reveal Solution Discussion Select an answer first
6. 15foundation · easy

   A virtual server is configured with a SNAT pool containing the addresses 10.1.1.10, 10.1.1.11, and 10.1.1.12. When a client connects, what will be the egress source IP for the connection to the pool member?

   • AOne of the addresses from the SNAT pool (10.1.1.10, 10.1.1.11, or 10.1.1.12)
   • BThe client's original IP address
   • CThe pool member's IP address
   • DThe virtual server's destination IP address
   Reveal Solution Discussion Select an answer first