An administrator needs to verify the boot location of a BIG-IP device but only has SSH access to the command line. The administrator is not familiar with tmsh syntax. Which command should the administrator use to view the current boot location?

tmsh show sys software boot-location

A change-management record states that the BIG-IP device should boot from volume HD1.3 after the next maintenance window. The administrator runs 'tmsh show sys software boot-location' and sees 'Boot Location: HD1.2'. What should the administrator do to align the device with the documented configuration?

Reboot the device immediately to force it to use HD1.3.

Change the boot location to HD1.3 using 'tmsh modify sys software boot-location HD1.3' and then reboot during the maintenance window.

Run 'tmsh install sys software HD1.3' to set the boot location.

Delete HD1.2 from the system to force the device to boot from HD1.3.

Why is it important to know the current boot location before performing a software upgrade on a BIG-IP?

To ensure the new image is installed on the correct volume and will be loaded after reboot.

To verify the management IP address is reachable.

To determine the license key needed for the new version.

To confirm the system has enough memory for the upgrade.

An administrator runs 'tmsh show sys software boot-location' and sees 'Boot Location: HD1.2'. The administrator expects the device to boot from HD1.1 because that is the volume with the latest hotfix. What should the administrator conclude?

The boot location is set to HD1.2, so the device will boot from HD1.2, not HD1.1.

The device will boot from HD1.1 because it has the latest hotfix.

The device will boot from both volumes in a load-balancing manner.

The output is incorrect because HD1.1 should be the boot location.

What does the 'Current Boot Location' field in the BIG-IP web UI indicate?

The volume and image that will be loaded on the next reboot.

The version of the software currently running.

The last time the system was rebooted.

The IP address of the management interface.

F5Certified Administrator, BIG-IP

Domain 4Objective 3

Show Currently Configured Boot Location F5CAB1 Practice Questions (Page 2)

Part of the Apply procedural concepts required to manage software images domain, which makes up ~22% of our current practice bank. F5 does not publish an official question count, but from its 30-minute exam (~10–20 total, ~2–4 in this domain), expect 1–1 from this objective — we provide 18 practice questions to prepare you well beyond it. (estimate)

18questions here

4free pages

4concepts

Questions 6–10

6application · medium
An administrator needs to verify the boot location of a BIG-IP device but only has SSH access to the command line. The administrator is not familiar with tmsh syntax. Which command should the administrator use to view the current boot location?
Select an answer first
7application · medium
A change-management record states that the BIG-IP device should boot from volume HD1.3 after the next maintenance window. The administrator runs 'tmsh show sys software boot-location' and sees 'Boot Location: HD1.2'. What should the administrator do to align the device with the documented configuration?
Select an answer first
8foundation · easy
Why is it important to know the current boot location before performing a software upgrade on a BIG-IP?
Select an answer first
9application · medium
An administrator runs 'tmsh show sys software boot-location' and sees 'Boot Location: HD1.2'. The administrator expects the device to boot from HD1.1 because that is the volume with the latest hotfix. What should the administrator conclude?
Select an answer first
10foundation · easy
What does the 'Current Boot Location' field in the BIG-IP web UI indicate?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to F5CAB1

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by F5. “F5CAB1” is a trademark of its owner, used for identification only.