Explain Management IP Connectivity Issue F5CAB1 Practice Questions (Page 1)

Questions 1–5

1. 1foundation · easy

   How does the management interface's default gateway affect connectivity?

   • AIt is always required for the management interface to function.
   • BIt must be the same as the default gateway for data traffic.
   • CIt is used to route data-plane traffic between VLANs.
   • DIt is required only when management traffic must reach subnets beyond the local network.
   Reveal Solution Discussion Select an answer first
2. 2foundation · easy

   Which of the following is a common cause of management IP connectivity issues?

   • AVirtual server down
   • BHigh availability sync failure
   • CIncorrect netmask on the management interface
   • DSNAT pool exhaustion
   Reveal Solution Discussion Select an answer first
4. 3application · medium

   An administrator is configuring a BIG-IP system and sets the management IP to 192.168.1.10 with a netmask of 255.255.255.0 and a gateway of 192.168.1.1. The administrator can ping the management IP from a workstation on the same subnet, but cannot ping it from a workstation on the 192.168.2.0/24 subnet. What is the most likely cause?

   • AThe management netmask is incorrect.
   • BThe management interface is down.
   • CThe management IP is not in the same subnet as the workstation.
   • DThe management gateway is not reachable or is misconfigured.
   Reveal Solution Discussion Select an answer first
5. 4foundation · easy

   What is a direct consequence of losing management IP connectivity to a BIG-IP system?

   • ASNAT translations are cleared.
   • BAdministrators cannot access the device for configuration or monitoring.
   • CData-plane traffic forwarding stops immediately.
   • DThe device automatically reboots.
   Reveal Solution Discussion Select an answer first
6. 5foundation · easy

   How does a management IP connectivity issue affect system operations?

   • AIt stops the BIG-IP from syncing configuration to the standby unit.
   • BIt forces the device to use the serial console for all traffic forwarding.
   • CIt prevents administrators from performing routine maintenance and upgrades.
   • DIt causes all virtual servers to go offline.
   Reveal Solution Discussion Select an answer first