Objective 1.16 Explain the Networking Requirements of Placing Devices Within a GTM Data Center Object 302 Practice Questions (Page 1)

Questions 1–5

1. 1application · medium

   A network administrator is adding a new BIG-IP DNS device to an existing GTM data center object. The device is in a different building on the same campus. The administrator has verified that the device can reach the virtual servers in the data center. However, the device cannot join the GTM configuration group. What is the most likely networking issue?

   • AThe device is not configured with a default gateway.
   • BThe device does not have a public IP address.
   • CThe device cannot reach the synchronization address of the existing GTM devices.
   • DThe device is on a different subnet than the existing GTM devices.
   Reveal Solution Discussion Select an answer first
2. 2application · medium

   An organization is deploying GTM in a multi-site environment. Each site will have its own GTM data center object. The BIG-IP DNS devices at each site are configured with self IPs on the internal network. The network team has confirmed that the devices can reach the virtual servers at their own site. What must be ensured for the GTM data center objects to work correctly across sites?

   • AEach site must have a public IP address for its GTM data center object.
   • BThe virtual servers at each site must be configured with a default gateway pointing to the BIG-IP DNS devices.
   • CEach site's BIG-IP DNS devices must be on the same subnet as the virtual servers they monitor.
   • DThe BIG-IP DNS devices at different sites must be able to reach each other's synchronization addresses.
   Reveal Solution Discussion Select an answer first
4. 3foundation · easy

   In a GTM configuration, what is the purpose of a 'virtual server' object?

   • AIt defines the DNS zone and name resolution for a domain.
   • BIt specifies the health check probes used to monitor the availability of a service.
   • CIt groups multiple BIG-IP devices into a single logical unit for failover.
   • DIt represents a specific IP address and port on a BIG-IP device that can receive traffic for a wideIP.
   Reveal Solution Discussion Select an answer first
5. 4foundation · easy

   In a GTM data center object, what is the role of the 'link' object in relation to networking requirements?

   • AIt provides the authentication credentials for the GTM to access the device.
   • BIt assigns the virtual server IP addresses to the data center's VLANs.
   • CIt specifies the routing protocol used between GTM and the BIG-IP devices.
   • DIt defines the network path and bandwidth characteristics between the data center and the internet.
   Reveal Solution Discussion Select an answer first
6. 5foundation · easy

   Which GTM object represents a collection of BIG-IP devices that share the same physical location and are treated as a single unit for load balancing decisions?

   • APool
   • BData center
   • CWideIP
   • DProber pool
   Reveal Solution Discussion Select an answer first