A network engineer is setting up a new branch office. The office has 20 wired devices and 10 wireless devices. The engineer wants to ensure that wireless devices can access the internet but cannot access the wired LAN. Which configuration should be used?

Use a separate router for the wireless network and connect it to the internet only

Disable the DHCP server on the access point

Place the access point on a separate VLAN and configure the router to allow internet access but block access to the LAN

Connect the access point directly to the switch without any VLAN configuration

A company has a network with a router, a switch, and an access point. The router is connected to the internet, the switch is connected to the router, and the access point is connected to the switch. Employees using Wi-Fi can access the internet, but they cannot access the company's file server, which is connected to the switch. What is the most likely cause?

The switch is not forwarding broadcast traffic

The router is not configured for NAT

The access point is not connected to the switch

The file server is on a different VLAN than the access point

A hospital is designing a network for its critical patient-monitoring system. The network must remain operational even if one cable or switch fails. The budget is sufficient for redundant hardware. Which topology and hardware approach best meets this requirement?

Star topology with a single high-end switch

Ring topology with a single ring

Bus topology with a single backbone cable

Partial mesh topology with redundant switches

A startup is designing a network for 10 employees. They expect to double in size within a year. They want to minimize upfront cost but also avoid having to re-cable the office. Which topology and hardware choice is most appropriate?

A mesh topology with every device connected to every other device

A ring topology with each device connected to two neighbors

A star topology with a 24-port switch

A bus topology with a single backbone cable

EC-CouncilSOC Essentials

Domain 1Objective 2

Network Topologies and Hardware Components SCE Practice Questions (Page 2)

Part of the Computer Network and Security Fundamentals domain, which makes up ~16% of our current practice bank. EC-Council does not publish an official question count, but from its 120-minute exam (~50–80 total, ~8–13 in this domain), expect 1–2 from this objective — we provide 32 practice questions to prepare you well beyond it. (estimate)

32questions here

7free pages

4concepts

Questions 6–10

6expert · medium
A network engineer is setting up a new branch office. The office has 20 wired devices and 10 wireless devices. The engineer wants to ensure that wireless devices can access the internet but cannot access the wired LAN. Which configuration should be used?
Select an answer first
7application · medium
A company has a network with a router, a switch, and an access point. The router is connected to the internet, the switch is connected to the router, and the access point is connected to the switch. Employees using Wi-Fi can access the internet, but they cannot access the company's file server, which is connected to the switch. What is the most likely cause?
Select an answer first
8application · medium
A hospital is designing a network for its critical patient-monitoring system. The network must remain operational even if one cable or switch fails. The budget is sufficient for redundant hardware. Which topology and hardware approach best meets this requirement?
Select an answer first
9application · medium
A startup is designing a network for 10 employees. They expect to double in size within a year. They want to minimize upfront cost but also avoid having to re-cable the office. Which topology and hardware choice is most appropriate?
Select an answer first
10foundation · easy
Which topology provides the highest level of redundancy and fault tolerance because every device has a dedicated point-to-point connection to every other device?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to SCE

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by EC-Council. “SCE” is a trademark of its owner, used for identification only.

Network Topologies and Hardware Components SCE Practice Questions (Page 2)

Questions 6–10

A network engineer is setting up a new branch office. The office has 20 wired devices and 10 wireless devices. The engineer wants to ensure that wireless devices can access the internet but cannot access the wired LAN. Which configuration should be used?

A hospital is designing a network for its critical patient-monitoring system. The network must remain operational even if one cable or switch fails. The budget is sufficient for redundant hardware. Which topology and hardware approach best meets this requirement?

A startup is designing a network for 10 employees. They expect to double in size within a year. They want to minimize upfront cost but also avoid having to re-cable the office. Which topology and hardware choice is most appropriate?

Which topology provides the highest level of redundancy and fault tolerance because every device has a dedicated point-to-point connection to every other device?

Keep studying — Computer Network and Security Fundamentals