You need to perform firmware updates on a host in a 4-node VxRail cluster. The cluster has sufficient capacity to evacuate the host's VMs. You place the host in maintenance mode. After the update, you exit maintenance mode. What should you verify to ensure the cluster is fully healthy before proceeding with the next host?

Ensure that the host's maintenance mode was exited with the 'Ensure Accessibility' option.

Confirm that the host's VMs have been migrated back from other hosts.

Check that the vSAN health checks report green and that all objects have completed resynchronization.

Verify that the host has been re-added to the vSAN cluster and that its disks are mounted.

A VxRail cluster is at 80% capacity. You need to ensure that the cluster does not run out of capacity in the next 6 months. The growth rate is 3% per month. You have the option to add capacity drives or add a new host. What should you do?

Change the storage policies to FTT=1, RAID-5 to reduce capacity usage.

Add capacity drives to the existing hosts.

Analyze the capacity usage and forecast to determine the exact capacity needed.

In a vSAN cluster with fault domains, where does an administrator assign hosts to a fault domain?

In the vSAN cluster settings under Fault Domains

In the VM storage policy settings

In the vSAN disk group configuration

In the ESXi host's advanced system settings

A VxRail administrator wants to see how much vSAN capacity is currently used and how much is free. Where in vCenter Server can this information be found?

Cluster Monitor > vSAN > Capacity

Cluster Monitor > vSAN > Performance

Cluster Monitor > vSAN > Health

Cluster Configure > vSAN > Services

Dell VxRail Operate v2

Domain 2Objective 6

Manage the VxRail vSAN Cluster Availability VXRAIL-OPERATE-V2 Practice Questions (Page 1)

Part of the Manage the VxRail domain, which accounts for 35% of the VXRAIL-OPERATE-V2 exam.

22questions here

5free pages

8concepts

35%of the exam

Questions 1–5

1application · medium
You need to perform firmware updates on a host in a 4-node VxRail cluster. The cluster has sufficient capacity to evacuate the host's VMs. You place the host in maintenance mode. After the update, you exit maintenance mode. What should you verify to ensure the cluster is fully healthy before proceeding with the next host?
Select an answer first
2application · medium
A VxRail cluster is at 80% capacity. You need to ensure that the cluster does not run out of capacity in the next 6 months. The growth rate is 3% per month. You have the option to add capacity drives or add a new host. What should you do?
Select an answer first
3application · medium
A VxRail cluster has 6 hosts and is configured with 2 fault domains, each containing 3 hosts. You need to create a storage policy for a new VM that must tolerate the failure of an entire fault domain. What is the minimum FTT setting you should use?
Select an answer first
4foundation · easy
In a vSAN cluster with fault domains, where does an administrator assign hosts to a fault domain?
Select an answer first
5foundation · easy
A VxRail administrator wants to see how much vSAN capacity is currently used and how much is free. Where in vCenter Server can this information be found?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to VXRAIL-OPERATE-V2

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Dell Technologies. “VXRAIL-OPERATE-V2” is a trademark of its owner, used for identification only.

Manage the VxRail vSAN Cluster Availability VXRAIL-OPERATE-V2 Practice Questions (Page 1)

Questions 1–5

A VxRail cluster is at 80% capacity. You need to ensure that the cluster does not run out of capacity in the next 6 months. The growth rate is 3% per month. You have the option to add capacity drives or add a new host. What should you do?

A VxRail cluster has 6 hosts and is configured with 2 fault domains, each containing 3 hosts. You need to create a storage policy for a new VM that must tolerate the failure of an entire fault domain. What is the minimum FTT setting you should use?

In a vSAN cluster with fault domains, where does an administrator assign hosts to a fault domain?

A VxRail administrator wants to see how much vSAN capacity is currently used and how much is free. Where in vCenter Server can this information be found?

Keep studying — Manage the VxRail