Review Completed Configuration for Implementation. VXRAIL-DESIGN Practice Questions (Page 1)

Questions 1–5

1. 1foundation · easy

   Which tool or interface is commonly used to validate that VxRail configuration settings are correctly applied?

   • AA physical console connected to each node
   • BVMware vCenter Server only
   • CThe Dell EMC support website
   • DVxRail Manager
   Reveal Solution Discussion Select an answer first
2. 2application · medium

   A VxRail cluster was designed to include a specific number of vSAN disk groups per host. During the implementation review, the administrator notices that one host has only three disk groups instead of the four specified in the design. All other hosts have the correct number. What should the administrator do?

   • ACheck the physical disk slots and vSAN disk group configuration on that specific host to identify the missing disk group.
   • BAdd a new disk group to the host using any available disk, regardless of the design.
   • CRebuild the entire cluster to ensure all hosts are identical.
   • DAccept the configuration as-is because vSAN can operate with fewer disk groups.
   Reveal Solution Discussion Select an answer first
4. 3application · medium

   A VxRail cluster was deployed with a design that specified a specific VLAN for vSAN traffic. During the post-implementation review, the administrator checks the vSAN network configuration in VxRail Manager and sees that the correct VLAN ID is present. However, the vSAN health check reports a 'network latency' warning. What should the administrator do NEXT?

   • AVerify the physical switch configuration for the vSAN VLAN to ensure it is trunked to the correct hosts and has no misconfigurations.
   • BChange the vSAN VLAN to a different one to see if the latency warning disappears.
   • CRestart the vSAN cluster services to clear the warning.
   • DIgnore the warning because the VLAN ID is correct and the design is validated.
   Reveal Solution Discussion Select an answer first
5. 4application · medium

   A VxRail cluster was designed to have a specific number of hosts. After the implementation, the administrator reviews the cluster in VxRail Manager and sees that all hosts are present and healthy. However, the design also specified a particular witness host for a stretched cluster, and the administrator notices that the witness host is not listed in the cluster. What should the administrator do?

   • ACheck the vSAN health status to see if the cluster can operate without the witness host.
   • BRemove the stretched cluster configuration and convert to a standard cluster.
   • CVerify the stretched cluster configuration and ensure the witness host is properly added and visible in the cluster.
   • DAssume the witness host is not needed because the cluster is healthy.
   Reveal Solution Discussion Select an answer first
6. 5application · medium

   A VxRail cluster was deployed with a design that specified a particular DNS server for the management network. During the review, the administrator checks the DNS settings in VxRail Manager and sees the correct IP address. However, a hostname lookup for the vCenter Server fails. What should the administrator do FIRST?

   • AVerify that the DNS server is reachable from the management network and that the forward and reverse lookup zones are correctly configured.
   • BRestart the vCenter Server to refresh its DNS cache.
   • CChange the DNS server to a public DNS server like 8.8.8.8 to resolve the issue.
   • DCheck the /etc/hosts file on the VxRail Manager to see if the hostname is manually mapped.
   Reveal Solution Discussion Select an answer first