A VxRail cluster expansion failed during the node addition phase. The new node is partially configured and shows as 'Not Responding' in vCenter. What should the administrator do?

Open a support case and wait for guidance.

Rerun the expansion wizard after cleaning up the failed node.

Reboot the new node and rerun the expansion wizard.

Manually remove the node from vCenter and then rerun the expansion wizard.

After a VxRail cluster expansion, the administrator notices that vSAN health is yellow. What should be done?

Reboot the new nodes to clear the warning.

Remove the new nodes and re-add them.

Ignore the warning; it will clear automatically.

Investigate the vSAN health alerts and resolve any issues.

A VxRail cluster is running vSphere 6.7 U3. The administrator wants to expand the cluster with nodes that have vSphere 7.0 pre-installed. What is the correct action?

Create a new cluster with the new nodes and migrate workloads.

Add the new nodes; VxRail will automatically downgrade their vSphere version.

Upgrade the existing cluster to vSphere 7.0 before adding the new nodes.

Add the new nodes with vSphere 7.0; mixed versions are supported in VxRail.

After expanding a VxRail cluster from 4 to 6 nodes, what should the administrator do to validate the expansion?

Reboot all nodes to ensure the new configuration is applied.

Run a performance test to ensure the cluster is faster.

Check that vSAN health is green and that all nodes are in a healthy state.

Verify that the new nodes have the same IP addresses as the old nodes.

Dell VxRail Design

Domain 5Objective 4

Identify VxRail Cluster Expansion Consideration. VXRAIL-DESIGN Practice Questions (Page 4)

Part of the Designing for Additional VxRail Configurations domain, which accounts for 28% of the VXRAIL-DESIGN exam.

19questions here

4free pages

6concepts

28%of the exam

Questions 16–19

16expert · hard
A VxRail cluster expansion failed during the node addition phase. The new node is partially configured and shows as 'Not Responding' in vCenter. What should the administrator do?
Select an answer first
17application · medium
After a VxRail cluster expansion, the administrator notices that vSAN health is yellow. What should be done?
Select an answer first
18expert · hard
A VxRail cluster is running vSphere 6.7 U3. The administrator wants to expand the cluster with nodes that have vSphere 7.0 pre-installed. What is the correct action?
Select an answer first
19application · medium
After expanding a VxRail cluster from 4 to 6 nodes, what should the administrator do to validate the expansion?
Select an answer first

Finished these 4 questions?

Review the revealed explanations, or continue through the curriculum.

No more pagesBack to VXRAIL-DESIGN

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Dell Technologies. “VXRAIL-DESIGN” is a trademark of its owner, used for identification only.