Before finalizing a VxRail design, the architect checks the design against the compatibility matrix and best practices. Which design step is this?

Assessing the existing environment

A customer is deploying a VxRail cluster in a remote office with limited physical space. The design must use two 25 GbE switches for redundancy. The customer wants to minimize the number of cables while ensuring that vSAN traffic does not share a path with VM traffic. What should the designer recommend?

Use VLAN tagging on both switches to separate vSAN and VM traffic logically

Use separate physical cables for vSAN and VM traffic on each switch

Dedicate one switch to vSAN traffic and the other to VM traffic

Use a single switch for all traffic to reduce cabling

Dell VxRail Design

Domain 1Objective 2

Describe the Process to Design a VxRail Cluster. VXRAIL-DESIGN Practice Questions (Page 2)

Part of the VxRail Physical Components and Design Process domain, which accounts for 10% of the VXRAIL-DESIGN exam.

24questions here

5free pages

8concepts

10%of the exam

Questions 6–10

6foundation · easy
Before finalizing a VxRail design, the architect checks the design against the compatibility matrix and best practices. Which design step is this?
Select an answer first
7foundation · easy
A customer requires a VxRail cluster that uses only solid-state drives for both cache and capacity. Which cluster type should be selected?
Select an answer first
8foundation · easy
A VxRail architect is determining how many nodes are needed to support the expected VM workload and future growth. Which design step is being performed?
Select an answer first
9foundation · easy
A customer is defining requirements for a VxRail cluster that will run a database. They state the database must store 50 TB of data and support 20,000 IOPS. Which two requirement categories are being specified?
Select an answer first
10expert · hard
A customer is deploying a VxRail cluster in a remote office with limited physical space. The design must use two 25 GbE switches for redundancy. The customer wants to minimize the number of cables while ensuring that vSAN traffic does not share a path with VM traffic. What should the designer recommend?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to VXRAIL-DESIGN

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Dell Technologies. “VXRAIL-DESIGN” is a trademark of its owner, used for identification only.

Describe the Process to Design a VxRail Cluster. VXRAIL-DESIGN Practice Questions (Page 2)

Questions 6–10

Before finalizing a VxRail design, the architect checks the design against the compatibility matrix and best practices. Which design step is this?

A customer requires a VxRail cluster that uses only solid-state drives for both cache and capacity. Which cluster type should be selected?

A VxRail architect is determining how many nodes are needed to support the expected VM workload and future growth. Which design step is being performed?

A customer is defining requirements for a VxRail cluster that will run a database. They state the database must store 50 TB of data and support 20,000 IOPS. Which two requirement categories are being specified?

Keep studying — VxRail Physical Components and Design Process