During the VxRail initialization wizard, after entering the vCenter credentials and selecting the cluster name, the wizard fails at the 'Validating Configuration' step. The error message indicates that the vCenter Server version is not supported. Which action should the administrator take to resolve this issue?

Change the cluster name to a shorter name that meets vCenter naming conventions.

Proceed with the initialization despite the warning, as it is only a recommendation.

Upgrade the vCenter Server to a version that is on the VxRail support matrix.

Re-enter the vCenter credentials to ensure they are correct.

After completing the VxRail initialization with vSAN ESA, an administrator wants to verify that the vSAN ESA data placement is working correctly. Which post-initialization check should be performed to confirm that ESA is using the expected data placement?

Run a performance test to measure IOPS and latency.

Check the vSAN disk management view to confirm the disk group configuration.

Verify that all hosts have the ESA compatibility license applied.

Check the vSAN health service for any warnings related to ESA data placement.

Which post-initialization check verifies that vSAN ESA is functioning correctly?

Checking the vSAN health status in vCenter

Verifying that all hosts have the latest BIOS

Ensuring that all VMs are powered on

Confirming that the cluster is visible in the VxRail Manager

During VxRail initialization with vSAN ESA, how are disk groups typically configured?

Disk groups are created only after the cluster is fully operational

Each host uses multiple disk groups with one cache device per group

Each host uses one disk group with a single cache device and multiple capacity devices

Disk groups are configured automatically by vCenter without user input

During VxRail initialization, which prerequisite must be verified before the wizard can proceed?

All hosts are added to Active Directory

A stretched cluster is configured

vSAN ESA is enabled on the vCenter

vCenter Server is deployed and accessible

Dell VxRail Deploy v2

Domain 6Objective 3

Perform a VxRail Initialization with vSAN ESA VXRAIL-DEPLOY-V2 Practice Questions (Page 2)

Part of the Deploying the VxRail Cluster domain, which accounts for 24% of the VXRAIL-DEPLOY-V2 exam.

12questions here

3free pages

4concepts

24%of the exam

Questions 6–10

6application · medium
During the VxRail initialization wizard, after entering the vCenter credentials and selecting the cluster name, the wizard fails at the 'Validating Configuration' step. The error message indicates that the vCenter Server version is not supported. Which action should the administrator take to resolve this issue?
Select an answer first
7expert · hard
After completing the VxRail initialization with vSAN ESA, an administrator wants to verify that the vSAN ESA data placement is working correctly. Which post-initialization check should be performed to confirm that ESA is using the expected data placement?
Select an answer first
8foundation · easy
Which post-initialization check verifies that vSAN ESA is functioning correctly?
Select an answer first
9foundation · easy
During VxRail initialization with vSAN ESA, how are disk groups typically configured?
Select an answer first
10foundation · easy
During VxRail initialization, which prerequisite must be verified before the wizard can proceed?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to VXRAIL-DEPLOY-V2

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Dell Technologies. “VXRAIL-DEPLOY-V2” is a trademark of its owner, used for identification only.