Configure and Verify the Operation of AAA Security in OS10 POWERSWITCH-DATA-CENTER-DEPLOY Practice Questions (Page 4)

Questions 16–17

1. 16foundation · easy

   Which command is used to enable accounting for commands in OS10?

   • Aaaa accounting tacacs+ commands
   • Baaa accounting commands default tacacs+
   • Caccounting commands tacacs+
   • Dtacacs+ accounting commands
   Reveal Solution Discussion Select an answer first
2. 17expert · hard

   An OS10 switch is configured to use RADIUS for authentication. Users can log in successfully, but the RADIUS server logs show that the switch is sending accounting requests to the wrong port. The RADIUS server listens for accounting on port 1813, but the switch is sending to port 1812. What is the most likely cause?

   • AThe switch's VTY lines are configured with 'radius' as the accounting method.
   • BThe switch's RADIUS configuration does not specify a separate accounting port.
   • CThe RADIUS server is configured with a different shared secret for accounting.
   • DThe RADIUS server's IP address is configured incorrectly on the switch.
   Reveal Solution Discussion Select an answer first