An engineer is troubleshooting an SFS cluster that is not synchronizing configuration between two Dell PowerSwitch S5232F-ON switches. The engineer runs 'show sfs cluster' and sees that the cluster status is 'Down'. What is the most likely cause?

The management interfaces of the two switches cannot reach each other.

The switches are running different Dell OS versions.

The VLT domain is not configured on either switch.

The SFS cluster name is longer than 32 characters.

How does OMNI integrate with Dell PowerSwitch to support network automation?

By automatically configuring all switches without any human intervention

By replacing the need for a separate automation platform

By providing a dedicated management network that ensures reliable access for automation tools

By encrypting all management traffic to prevent unauthorized access

What is the primary function of OMNI (Open Management Network Infrastructure) in a Dell PowerSwitch environment?

To increase the data plane throughput of the switches

To provide a wireless access point for management devices

To provide a dedicated out-of-band management network for network devices

To replace the need for any network management protocols like SNMP

A network administrator is configuring OMNI on a Dell PowerSwitch S5232F-ON. The administrator wants to ensure that the OMNI API is accessible only from the automation server's IP address. Which configuration step should the administrator take?

Configure an IP access-list that permits only the automation server's IP address and apply it to the OMNI API.

Configure the OMNI API to use SNMPv3 for authentication.

Configure the OMNI API to use a different port.

Configure the OMNI API to use a different API version.

Dell PowerSwitch Data Center Deploy

Domain 7Objective 3

Configure and Verify Operation of SFS and OMNI POWERSWITCH-DATA-CENTER-DEPLOY Practice Questions (Page 2)

Part of the Network Automation domain, which accounts for 5% of the POWERSWITCH-DATA-CENTER-DEPLOY exam.

20questions here

4free pages

6concepts

5%of the exam

Questions 6–10

6foundation · easy
Which show command is used to verify the operational status of OMNI on a Dell PowerSwitch?
Select an answer first
7application · medium
An engineer is troubleshooting an SFS cluster that is not synchronizing configuration between two Dell PowerSwitch S5232F-ON switches. The engineer runs 'show sfs cluster' and sees that the cluster status is 'Down'. What is the most likely cause?
Select an answer first
8foundation · easy
How does OMNI integrate with Dell PowerSwitch to support network automation?
Select an answer first
9foundation · easy
What is the primary function of OMNI (Open Management Network Infrastructure) in a Dell PowerSwitch environment?
Select an answer first
10expert · hard
A network administrator is configuring OMNI on a Dell PowerSwitch S5232F-ON. The administrator wants to ensure that the OMNI API is accessible only from the automation server's IP address. Which configuration step should the administrator take?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to POWERSWITCH-DATA-CENTER-DEPLOY

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Dell Technologies. “POWERSWITCH-DATA-CENTER-DEPLOY” is a trademark of its owner, used for identification only.