What is the primary purpose of a host group in PowerStore?

To configure the storage array's network interfaces

To group multiple volumes for snapshot management

To create a single initiator for multiple hosts

To manage multiple hosts with common access to block storage

After mapping a volume to a Windows host on a PowerStore array, the storage administrator wants to verify that the host can see the LUN. The host is connected via Fibre Channel. What is the most direct way to verify host access?

Verify the FC switch zoning is correct.

Open Disk Management on the Windows host and check if the new disk appears.

Check the PowerStore Manager volume details page for the host mapping.

Restart the Windows host and check the event log.

An administrator is setting up a new Windows Server that will connect to a PowerStore array using iSCSI. The server has two iSCSI initiators configured. The administrator needs to create a host object in PowerStore Manager. Where can the administrator find the IQNs needed for the host object?

From the server's BIOS boot screen.

From the iSCSI Initiator Properties panel in Windows.

From the network switch's MAC address table.

From the PowerStore array's iSCSI portal settings.

A company is deploying a new application server that will connect to a PowerStore array. The server has two Fibre Channel HBAs and two iSCSI NICs. The storage administrator wants to configure the host object to support both FC and iSCSI connectivity. What should the administrator do?

Create two separate host objects, one for FC and one for iSCSI, and map volumes to both.

Create a single host object and add both the WWNs and the IQNs as initiators.

Create a host group with one host for FC and one for iSCSI.

Create one host object with only the WWNs, since FC is preferred.

Dell PowerStore Deploy

Domain 4Objective 2

Configure Host Access to PowerStore Block Storage Resources. POWERSTORE-DEPLOY Practice Questions (Page 5)

Part of the PowerStore Block Provisioning domain, which accounts for 15% of the POWERSTORE-DEPLOY exam. Dell Technologies does not publish an official question count, but from its 90-minute exam (~35–60 total, ~5–9 in this domain), expect 2–3 from this objective — we provide 24 practice questions to prepare you well beyond it. (estimate)

24questions here

5free pages

6concepts

15%of the exam

Questions 21–24

21foundation · easy
What is the primary purpose of a host group in PowerStore?
Select an answer first
22application · medium
After mapping a volume to a Windows host on a PowerStore array, the storage administrator wants to verify that the host can see the LUN. The host is connected via Fibre Channel. What is the most direct way to verify host access?
Select an answer first
23application · medium
An administrator is setting up a new Windows Server that will connect to a PowerStore array using iSCSI. The server has two iSCSI initiators configured. The administrator needs to create a host object in PowerStore Manager. Where can the administrator find the IQNs needed for the host object?
Select an answer first
24application · medium
A company is deploying a new application server that will connect to a PowerStore array. The server has two Fibre Channel HBAs and two iSCSI NICs. The storage administrator wants to configure the host object to support both FC and iSCSI connectivity. What should the administrator do?
Select an answer first

Finished these 4 questions?

Review the revealed explanations, or continue through the curriculum.

No more pagesBack to POWERSTORE-DEPLOY

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Dell Technologies. “POWERSTORE-DEPLOY” is a trademark of its owner, used for identification only.