A team is installing a PowerScale cluster. They have racked and cabled all nodes, but when they power on the first node, it does not boot. Which troubleshooting step should they perform first?

Check the power connections and ensure the node is receiving power.

Replace the node's motherboard.

Reinstall the operating system on the node.

Check the network configuration of the node.

A data center is installing a PowerScale cluster in a space with limited floor space. The cluster will consist of 8 nodes. The facility manager wants to minimize the footprint. What is the best approach?

Use a single rack and install the nodes as close together as possible.

Install the nodes on shelves instead of rack rails.

Use two racks and distribute the nodes evenly.

Use a rack with a larger depth to accommodate more nodes.

What is the primary power requirement for a Dell PowerScale node installation?

The node must have a dedicated circuit breaker rated at 30 amps.

The power supply must match the voltage and amperage ratings specified on the node's power supply label.

The node must be connected to a 3-phase power source to ensure balanced load.

Each node must be connected to a UPS that provides at least 30 minutes of backup power.

Which procedure is part of rack mounting Dell PowerScale nodes?

Install the nodes from top to bottom to maintain rack stability.

Use the sliding rails provided and secure the node to the rack with screws.

Place the node on a shelf and connect all cables before securing it.

Lift the node by its handles and slide it into the rack without rails.

Dell PowerScale Maintenance v2

Domain 3Objective 1

Plan the Installation POWERSCALE-MAINTENANCE Practice Questions (Page 3)

Part of the PowerScale Hardware Installation domain, which accounts for 25% of the POWERSCALE-MAINTENANCE exam.

14questions here

3free pages

4concepts

25%of the exam

Questions 11–14

11expert · hard
A team is installing a PowerScale cluster. They have racked and cabled all nodes, but when they power on the first node, it does not boot. Which troubleshooting step should they perform first?
Select an answer first
12application · medium
A data center is installing a PowerScale cluster in a space with limited floor space. The cluster will consist of 8 nodes. The facility manager wants to minimize the footprint. What is the best approach?
Select an answer first
13foundation · easy
What is the primary power requirement for a Dell PowerScale node installation?
Select an answer first
14foundation · easy
Which procedure is part of rack mounting Dell PowerScale nodes?
Select an answer first

Finished these 4 questions?

Review the revealed explanations, or continue through the curriculum.

No more pagesBack to POWERSCALE-MAINTENANCE

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Dell Technologies. “POWERSCALE-MAINTENANCE” is a trademark of its owner, used for identification only.