A technician has completed cabling a PowerScale node and is verifying the connections. The front-end link indicators are lit, but the back-end link indicators are not. What is the most appropriate next step?

Check the back-end cable connections and reseat them if necessary

Proceed with cluster configuration, as the back-end links may come up later

Reboot the node to reset the back-end interfaces

A PowerScale node has four 10GbE ports that can be used for either front-end or back-end networking. The technician needs to configure the node for a cluster with two nodes. What is the recommended port configuration?

Use all four ports for back-end networking

Use two ports for front-end and two ports for back-end

Use one port for front-end and three ports for back-end

Use all four ports for front-end networking

After connecting a PowerScale node's network cable, what indicator confirms that the link is established?

The drive activity LED flashes rapidly

The power LED on the front panel turns green

The link LED on the node's network port is lit or blinking

The fan status LED is solid blue

After cabling a PowerScale node, the technician observes that the front-end link indicator is blinking. What does a blinking link indicator typically indicate?

Network activity is occurring on the port

Dell PowerScale Maintenance v2

Domain 3Objective 4

Follow Node Cabling Best Practices POWERSCALE-MAINTENANCE Practice Questions (Page 2)

Part of the PowerScale Hardware Installation domain, which accounts for 25% of the POWERSCALE-MAINTENANCE exam.

18questions here

4free pages

3concepts

25%of the exam

Questions 6–10

6application · medium
A technician has completed cabling a PowerScale node and is verifying the connections. The front-end link indicators are lit, but the back-end link indicators are not. What is the most appropriate next step?
Select an answer first
7foundation · easy
Which cable type is required to connect a PowerScale node to an external storage expansion shelf?
Select an answer first
8application · medium
A PowerScale node has four 10GbE ports that can be used for either front-end or back-end networking. The technician needs to configure the node for a cluster with two nodes. What is the recommended port configuration?
Select an answer first
9foundation · easy
After connecting a PowerScale node's network cable, what indicator confirms that the link is established?
Select an answer first
10application · medium
After cabling a PowerScale node, the technician observes that the front-end link indicator is blinking. What does a blinking link indicator typically indicate?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to POWERSCALE-MAINTENANCE

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Dell Technologies. “POWERSCALE-MAINTENANCE” is a trademark of its owner, used for identification only.