Explain PowerMax Family Port Management. POWERMAX-OPERATE Practice Questions (Page 1)

Questions 1–5

1. 1foundation · easy

   Which port type is used primarily to connect PowerMax storage to an IP-based network for block-level access?

   • ASAS
   • BFCoE
   • CiSCSI
   • DFibre Channel (FC)
   Reveal Solution Discussion Select an answer first
2. 2application · medium

   A PowerMax administrator notices that a front-end Fibre Channel port is showing a high number of CRC errors in the performance monitor. The port is connected to a top-of-rack switch. What is the most likely cause of these errors?

   • AThe port speed is set too high for the cable length.
   • BThe host is sending more data than the port can handle.
   • CA faulty or dirty fiber optic cable or SFP+ transceiver.
   • DAn incorrect zone configuration on the SAN switch.
   Reveal Solution Discussion Select an answer first
4. 3foundation · easy

   Which tool or interface is commonly used to monitor the status and performance of PowerMax ports?

   • AWindows Device Manager
   • BVMware vSphere Client
   • CBIOS setup utility
   • DUnisphere for PowerMax
   Reveal Solution Discussion Select an answer first
5. 4foundation · easy

   Which configuration setting is typically applied to back-end ports on a PowerMax to connect to disk enclosures?

   • AIP subnet mask
   • BiSCSI initiator name
   • CFibre Channel topology (e.g., point-to-point)
   • DZoning configuration
   Reveal Solution Discussion Select an answer first
6. 5foundation · easy

   What is the primary role of front-end ports on a PowerMax storage system?

   • AManage array cooling and power
   • BConnect to disk drives and SSDs
   • CReplicate data to remote arrays
   • DProvide host access to storage volumes
   Reveal Solution Discussion Select an answer first