A technician is installing a PowerMax 2000 and needs to connect the engine enclosures to the I/O bays. The system uses SAS cables for the fabric. What should the technician verify about the SAS cables before installation?

That they are the correct length and type for the PowerMax 2000.

That they are shielded to prevent EMI from power cables.

That they are labeled with the correct port numbers.

That they are compatible with third-party switches in the fabric.

A technician is replacing a power cable in a PowerMax 8000. The system is running with redundant power supplies, but the technician accidentally trips the circuit breaker for the PDU that feeds one of the power supplies. What is the immediate impact on the system?

The system will automatically switch to battery backup.

The system will continue to operate on the other power supply, but will be in a degraded state.

The system will shut down to protect the hardware.

The system will experience a performance degradation until the breaker is reset.

Dell PowerMax Install

Domain 4Objective 2

Explain and Identify PowerMax 2000 and 8000 Cabling POWERMAX-INSTALL Practice Questions (Page 3)

Part of the PowerMax Installation and Upgrade domain, which accounts for 27% of the POWERMAX-INSTALL exam.

12questions here

3free pages

4concepts

27%of the exam

Questions 11–12

11application · medium
A technician is installing a PowerMax 2000 and needs to connect the engine enclosures to the I/O bays. The system uses SAS cables for the fabric. What should the technician verify about the SAS cables before installation?
Select an answer first
12expert · hard
A technician is replacing a power cable in a PowerMax 8000. The system is running with redundant power supplies, but the technician accidentally trips the circuit breaker for the PDU that feeds one of the power supplies. What is the immediate impact on the system?
Select an answer first

Finished these 2 questions?

Review the revealed explanations, or continue through the curriculum.

No more pagesBack to POWERMAX-INSTALL

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Dell Technologies. “POWERMAX-INSTALL” is a trademark of its owner, used for identification only.

Explain and Identify PowerMax 2000 and 8000 Cabling POWERMAX-INSTALL Practice Questions (Page 3)

Questions 11–12

A technician is installing a PowerMax 2000 and needs to connect the engine enclosures to the I/O bays. The system uses SAS cables for the fabric. What should the technician verify about the SAS cables before installation?

A technician is replacing a power cable in a PowerMax 8000. The system is running with redundant power supplies, but the technician accidentally trips the circuit breaker for the PDU that feeds one of the power supplies. What is the immediate impact on the system?

Keep studying — PowerMax Installation and Upgrade