A solution architect is reviewing the manufacturing bin file for a PowerMax model. The bin file lists the maximum number of engines, drives, and ports. What is the primary purpose of these limits?

To define the maximum configuration that can be manufactured and ordered.

To specify the minimum configuration required for the system to operate.

To ensure the system meets performance benchmarks.

To list the supported software features for the model.

A storage architect runs PowerSizer for a new PowerMax deployment. The output summary shows a configuration with 16 engine slots, 128 GB DRAM per engine, and 2,400 15K RPM drives. When comparing this to the manufacturing bin file for the target model, the architect notices the bin file lists a maximum of 12 engine slots for that model. What should the architect do first?

Modify the PowerSizer input to reduce the engine count to 12 and re-run the sizing.

Select a different PowerMax model that supports 16 engines without re-running PowerSizer.

Ignore the bin file because it only applies to manufacturing, not to the logical design.

Proceed with the design because PowerSizer automatically validates against the bin file.

A PowerSizer output for a PowerMax 2500 shows 2,000 TB of raw capacity using 1.92 TB SSDs. The manufacturing bin file for the 2500 lists a maximum of 1,500 TB raw capacity. The customer's requirement is 1,800 TB usable after RAID-5 (3+1) protection. What is the most appropriate action?

Use larger capacity drives (e.g., 3.84 TB) to meet the raw capacity within the bin file limit.

Proceed with the original design because PowerSizer output is always accurate.

Select a higher model (e.g., PowerMax 8500) without re-running PowerSizer.

Reduce the usable capacity requirement to 1,500 TB to fit the bin file.

Dell PowerMax Design v2

Domain 2Objective 3

Compare and Analyze PowerSizer Output Summary to the Manufacturing Bin File. POWERMAX-DESIGN-V2 Practice Questions (Page 3)

Part of the PowerMax Design Resources and Environment domain, which accounts for 15% of the POWERMAX-DESIGN-V2 exam.

18questions here

4free pages

4concepts

15%of the exam

Questions 11–15

11application · medium
A solution architect is reviewing the manufacturing bin file for a PowerMax model. The bin file lists the maximum number of engines, drives, and ports. What is the primary purpose of these limits?
Select an answer first
12application · medium
A storage architect runs PowerSizer for a new PowerMax deployment. The output summary shows a configuration with 16 engine slots, 128 GB DRAM per engine, and 2,400 15K RPM drives. When comparing this to the manufacturing bin file for the target model, the architect notices the bin file lists a maximum of 12 engine slots for that model. What should the architect do first?
Select an answer first
13application · medium
A storage administrator is examining a PowerSizer output summary. The summary includes a section that shows the estimated IOPS and response time for the proposed configuration. What is this section called?
Select an answer first
14expert · hard
A PowerSizer output for a PowerMax 2500 shows 2,000 TB of raw capacity using 1.92 TB SSDs. The manufacturing bin file for the 2500 lists a maximum of 1,500 TB raw capacity. The customer's requirement is 1,800 TB usable after RAID-5 (3+1) protection. What is the most appropriate action?
Select an answer first
15application · medium
A storage architect is reviewing a PowerSizer output summary. The summary includes a section that lists the number of engines, drives, and ports. What is this section called?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to POWERMAX-DESIGN-V2

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Dell Technologies. “POWERMAX-DESIGN-V2” is a trademark of its owner, used for identification only.

Compare and Analyze PowerSizer Output Summary to the Manufacturing Bin File. POWERMAX-DESIGN-V2 Practice Questions (Page 3)

Questions 11–15

A solution architect is reviewing the manufacturing bin file for a PowerMax model. The bin file lists the maximum number of engines, drives, and ports. What is the primary purpose of these limits?

A storage administrator is examining a PowerSizer output summary. The summary includes a section that shows the estimated IOPS and response time for the proposed configuration. What is this section called?

A PowerSizer output for a PowerMax 2500 shows 2,000 TB of raw capacity using 1.92 TB SSDs. The manufacturing bin file for the 2500 lists a maximum of 1,500 TB raw capacity. The customer's requirement is 1,800 TB usable after RAID-5 (3+1) protection. What is the most appropriate action?

A storage architect is reviewing a PowerSizer output summary. The summary includes a section that lists the number of engines, drives, and ports. What is this section called?

Keep studying — PowerMax Design Resources and Environment